Operator
- I am very proud of the excellent performance shown by the
Ærfugl is one of the most profitable development projects on the Norwegian continental shelf. The initial estimated break-even oil price was
-
300 million barrels
The Ærfugl development is a major subsea project in two phases. Both phases are tied into the existing production vessel (FPSO) on the Skarv field, which is located approx. 210 km west of Sandnessjøen.
The Plan for Development and Operation (PDO) for Ærfugl was approved by the
The reservoir holds a total of around 300 million barrels of producible oil equivalents.
Total investment costs for the Ærfugl project (phase 1 and 2) are around
Improvements
Reorganizing the value chain through strategic partnerships and alliances is an important part of
-The subsea alliance, semi alliance and modification alliance have all been vital in this project. The alliances have not only been delivering on cost and schedule, despite Covid-19 related challenges; they have as well achieved major improvements since the PDO was approved, including significantly accelerated development of phase 2 and better economics, says SVP Projects,
Development of Ærfugl is enabled in particular by two new technologies:
· More efficient drainage of reservoir through new vertical valve trees.
· Long distance, electrically heated flow lines to avoid hydrates in the gas pipelines. This technology significantly improves heat efficiency compared with regular technology and enables longer tie-backs.
Reserves have as well increased since PDO due to continuous work to better understand the elongated reservoir.
Strengthening the Skarv area
The Ærfugl field development is adding five years lifetime extension to the Skarv FPSO.
-Ærfugl is an important part of the area development and value creation in the area. When both phases of Ærfugl come on stream, we will significantly increase our utilization at the Skarv FPSO, representing roughly a doubling of production compared to current levels, says Sverre Isak Bjørn, VP Operations &
-Production from the Ærfugl reservoir will also improve the energy efficiency. Consequently it will bring down CO2 emissions by 30-40% per barrel produced from Skarv FPSO, Bjørn adds.
Exploration success in the area in 2019 gave fresh perspectives on the geology around Skarv, generating new ideas on drilling prospects in the coming years.
-We are collaborating closely with our license partners. Together we have developed a solid strategic foundation to bring Skarv into the future, Bjørn adds.
Full speed for Phase 2
Phase 1, which develops the southern part of the Ærfugl field, consists of three new wells. Phase 2 consists of an additional three wells in the northern part of the field.
-The successful start-up of production from Phase 1 is a major milestone and a great achievement. However, there is no time to relax; we will keep momentum to safely deliver phase 2 on time and cost by the end of next year. Then we will celebrate, says Project manager for the Ærfugl development project,
He points at the close and efficient collaboration in- and between the involved alliances as a key success factor for the successful execution.
-The Subsea alliance between
FACTS ABOUT THE ÆRFUGL FIELD
· The more than 60 km long and 2-3 km wide Ærfugl reservoir is a gas reservoir.
· It holds a total of around 300 million barrels of producible oil equivalents.
· Total investment costs for the Ærfugl project (phase 1 and 2) are around
· The total `life of field' project has a break-even-price of below
· Ærfugl was first put on stream with the test producer A-1H in 2013 and has since produced via Skarv FPSO.
· In April this year, production started from the first Ærfugl phase 2 well - more than three years ahead of the original plan.
· The remaining two "phase 2 wells" will come on stream in 2021.The Ærfugl field produces via Skarv FPSO approximately 210 km west of Sandnessjøen.
· The subsea modules have been completed in Sandnessjøen and then transported offshore. The Ærfugl project has brought significant local ripple effects for local suppliers in the Helgeland region.
Contacts:
Investor contact:
Media contact: Ole-Johan Faret, Press Spokesman, tel.: +47 402 24 217
About
https://news.cision.com/aker-bp-asa/r/aerfugl-phase-1-project-starts-production,c3236392
https://mb.cision.com/Main/1629/3236392/1334550.pdf
(c) 2020 Cision. All rights reserved., source