Canadian Palladium Resources Inc. has received additional significant assay results from the East Bull Palladium Deposit, 90 kilometres west of Sudbury, Ontario. The latest diamond drilling results provide assays on the new "EOH Zone" and have further extended the Garden Zone on strike to the west and down dip from previous intersections. The EOH Zone is interpreted as a mineralized feeder dyke that underlies the Garden Zone at the west end of the East Bull Palladium Deposit. Hole EB-21-52 was extended from 230 m to 284 m to test mineralization in the newly discovered EOH Zone. The extension resulted in a 20 m intersection of the EOH Zone grading 1.39 g/t PdEq. This intersection is below previously reported intervals of the Garden Zone including 11.0 meters at 1.07 g/t PdEq in the same hole. Hole EB-21-67 had a wide 38.0 m intersection grading 1.31 g/t PdEq including 6.0 m at 2.0 g/t PdEq in the main Garden Zone; Hole EB-21-68 had multiple intersections with 5 metres of 0.99 g/tPdEq and 13 metres of 0.93 g/t PdEq in the Garden Zone, plus 4 metres of 1.62 g/t PdEq in the EOH Zone. Drill Results The intersections reported in this release are located in the western part of the Property. The results are part of a 15,000 m drill program with a primary objective of expanding the current Inferred Resource. The EOH Zone intersections include two significant intervals that confirm the discovery of this mineralized feeder zone located below the Garden Zone. The disseminated sulphide mineralization in the EOH Zone is associated with a melagabbro host rock that contains abundant gabbro inclusions. The current drilling indicates that the EOH Zone is northeast striking with a south dip. Additional drilling is planned to confirm this orientation. The diamond drill holes were all drilled at an azimuth of 180o with inclinations of -60o. Reported widths are drilled widths. True widths estimated to be 90% of the intersections for the Garden Zone. The orientation of the EOH Zone is not sufficiently well defined to estimate true widths at this time. In addition to results reported here, rhodium is being analyzed and will be reported at a later date. Drill Program QA/QC: This phase of the drilling program was carried out under the supervision of Garry Clark, P. Geo., of Clark Exploration Consulting, a Qualified Person as defined in NI43-
101. Drill core samples were split using a rock saw by Company staff, with half retained in the core box and stored in the Company's facility in Massey, Ontario. The drill core samples were transported in sealed bags by courier to Activation Laboratories ("Actlabs") in Ancaster, Ontario. Actlabs is an independent ISO/IEC 17025 certified laboratory. PGE analysis was performed using a 30 grams fire assay with an ICP-MS or ICP-AES finish. Multi-element analyses, including copper and nickel were analysed by four acid digestion using 0.25 grams with an ICP-AES finish. Certified standards, blanks and crushed duplicates are placed in the sample stream at a rate of one QA/QC sample per 10 core samples. Results are analyzed for acceptance at the time of import. All standards associated with the results in this press release were determined to be acceptable within the defined limits of the standard used.