Cannindah Resources Limited has continued to deliver on high grade copper intercepts from near surface in hole 2, hole 3 and now again in hole 4. The previously stated intention of this hole was to probe for the existence of a supergene zone which have now done with the results of the first 26m of Hole 4. The company continued focus will be on the copper located in the primary zone below the high grade supergene zone and monitoring what is continuing at depth in other areas. The balance of hole 4 results are yet to be provided by the lab and will be reported in due course. 13.5m @ 2.06% Cu,13.9 g/t Ag (12.5m to 26.0m) including:- 2m @ 6.01% Cu,16.4 g/t Ag (19.5m to 21.5m) . Surface gold-silver oxide zone in hole 21CAEDD004 returns: 12.5m @ 1.05 g/t Au & 60.1 g/t Ag, 0.39% Cu (0m to 12.5m). It is important to note here that don't even have the entire lab results for hole 4 yet and are at the time of writing this release approximately 340m into Hole 8 having completed nearby hole 7. Therefore a significant amount of data is still to be communicated to the market from material already at the lab awaiting assay from hole 4 to hole 8. Hole 8 is more than 140m to the south of the collar (start) of hole 3. This hole has already returned 493m @ 1.17% CuEq from surface, below which is a gold intercept of 11m @3.4g/tAu (567m - 578m). Elevated copper in the hundreds to thousands of ppm copper range,along with elevated silver up to 15 g/t Ag occur in the deeper sections of the hole (611m-762.6m), particularly associated with strongly sulphidic sections. Results confirm that the Mt Cannindah mineralised system is still open down plunge. Hole 8 is drilling in the same direction as hole 21CAEDD003 just further along strike. The intention of Hole 8 is to hopefully replicate some of the success of hole 3 to a significant depth presently planned to 550m. Once this information is to returned from the lab and communicated to the market will be looking forward to further drilling, and eventually a new interpretation of what is thought to be occurring at the Mt Cannindah breccia. Hole # 4 was a vertical hole to probe for additional near surface oxide, supergene and primary high grade copper - gold -silver mineralisation intersected at the top of hole 21CAEDD003 which as previously reported (ASX Announcement 9/11/2021) returned: A surface oxide zone (0m to 14m) leached of copper: 14m @ 0.4 g/t Au, 24 g/t Ag. A supergene zone (14m to 33m) enriched with copper: 19m @ 3.11% Cu, 0.74 g/t Au, 34 g/t Ag. An upper primary zone containing significant intersections including a: High grade primary zone (33m to 83m): 50m @ 2.02% Cu, 0.75 g/t Au, 40 g/t Ag. CAE herewithin reports lab assay results from the top section of hole 21CAEDD004. The collars of holes 3 & 4 start off in the order of 10m apart, however, given the relative directions of the holes, with hole 3 drilling away from hole 4, the hole traces are in the order of 40m to 50m apart, at around 100m downhole.