Drilling results from
Classic has received assay results from its recent deep infill RC drilling program, completed back in
The drilling programs consisted of 28 deep infill holes for 2,548m and a single shallow RC hole for 40m.
Deep Infill RC drilling
The 28-hole deep infill RC drilling program (FKGRC350-377) covered an area approximately 120m along strike to the north of the Proterozoic dyke (See Figure 2.0). The infill holes were focused on testing a gap that had been artificially created between previous shallow RC holes testing the oxide profile and much deeper previous RC holes testing the down-dip extent of the main granite-greenstone contact lode. If the gap could be filled in by zones of gold mineralisation, then final optimisation work may drive pit designs deeper allowing access to more minable gold bearing ore. The holes were drilled to an average depth of 100m below surface and were drilled on 20m x 10m and 10m x 10m grid spacings.
The drilling intersected significant zones of gold mineralisation in the gap between previous shallow RC holes and deeper RC holes testing the down-dip / down plunge extents (See figures 3, 4, 5 and 6*).
Further work will now be urgently undertaken to include these new gold intersections into the current resource model. Once this has been completed further optimisation work will be carried out. This work coupled with the outcomes of the bulk sampling program will aid greatly in final pit design work.
Better results from the deep infill holes include:
7m @ 2.67g/t Au from 71m in FKGRC350
3m @ 6.74g/t Au from 101m including 1m @ 15.00g/t Au from 102m in FKGRC360.
4m @ 18.97g/t Au from 76m including 2m @ 33.75g/t Au from 77m in FKGRC362.
2m @ 10.73g/t Au from 74m including 1m @ 19.90g/t Au from 74m in FKGRC367.
1m @ 14.20g/t Au from 69m in FKGRC368.
4m @ 16.93g/t Au from 101m including 1m @ 58.40g/t from 101m in FKGRC372.
6m @ 5.30g/t Au from 84m including 1m @ 17.40g/t Au from 88m in FKGRC373.
6m @ 7.72g/t Au from 78m including 1m @ 26.20g/t Au from 83m in FKGRC375.
5m @ 7.95g/t Au from 103m including 1m @ 24.90g/t from 107m in FKGRC377.
Shallow RC Drill hole
A single shallow RC hole (FKGRC378) was completed to a depth of 40m. The hole was drilled close to existing high-grade holes FKGRC061 which returned 9m grading 15.21 g/t from 22m and FKGRC018 which returned 10m grading 30.78 g/t from 28m (See Figure 4*). The hole was drilled to provide additional material for advanced metallurgical testwork and aid in further Research and Development studies.
Classic will be heading back to
*To view tables and figures, please visit:
https://abnnewswire.net/lnk/U4902JGB
About
Contact:
T: +61-8-6305-0221
E: contact@classicminerals.com.au
WWW: www.classicminerals.com.au
Copyright (C) 2021 ABN Newswire. All rights reserved., source