Cyprium Metals Limited reported final diamond drillhole results from the Phase 1 diamond drilling programme completed at Nanadie Well earlier this year. The Company's 5-hole (1,328m) diamond drilling programme was designed to test for sulphide mineralisation below a depth of 50m associated with a layered mafic intrusive unit outlined in the previous reverse circulation (RC) drilling programmes 1. Extensive zones of copper sulphide mineralisation were intersected in all holes from the diamond drilling programme to a drill hole depth of 312m. The oxide and sulphide mineralisation currently extends over a strike length of 750m and remains open along strike to the north and south and across strike to the west. The results from the all the drilling completed to date at Nanadie Well will be used in the preparation of a Mineral Resource estimate for inclusion in the Murchison Copper-Gold Project scoping study. Detailed evaluation of the drill core and multi-element data is ongoing to better understand the geological controls to the primary copper mineralisation. Encouragingly, elevated nickel and palladium values were found associated with several of the significant copper intervals. Significant assay results from holes NWD2002 and NWD2101 are summarised in Tables 2 to 5 and presented on Figure 1. Representative photos of the copper sulphide mineralisation in the drill core from both holes are shown in Images 1 to 7. Hole NWD2002 - copper mineralisation extends over 168m downhole, includin, 29m @ 0.6% Cu and 0.2 g/t Au from 49m including: 1m @ 1.1% Cu and 0.2 g/t Au from 50m, 2m @ 1.0% Cu and 0.2 g/t Au from 64m, 2m @ 1.7% Cu and 0.2 g/t Au from 72m, 10m @ 1.9% Cu and 0.2 g/t Au from 106m including: o 2m @ 6.2% Cu and 0.5 g/t Au from 107m, 1m @ 1.2% Cu and 0.2 g/t Au from 113m, 25m @ 0.6% Cu and 0.1 g/t Au from 146m including: 1m @ 1.2% Cu and 0.2 g/t Au from 154m, 1m @ 1.1% Cu and 0.1 g/t Au from 160m, 12m @ 0.6% Cu and 0.2 g/t Au from 187m including: 1m @ 1.9% Cu and 0.4 g/t Au from 197m. Hole NWD2101 - copper mineralisation extends over 274m downhole, including 5m @ 0.7% Cu and 0.1 g/t Au from 45m including: 2m @ 1.5% Cu and 0.2 g/t Au from 46m, 5m @ 1.9% Cu and 0.5 g/t Au from 75m including: 1m @ 6.2% Cu and 2.1 g/t Au from 76m, 4m @ 0.9% Cu and 0.2 g/t Au from 83m including: 1m @ 1.5% Cu and 0.3 g/t Au from 85m, 2m @ 1.0% Cu and 0.2 g/t Au from 91m, 35m @ 0.5% Cu and 0.1 g/t Au from 108m including: 2m @ 1.8% Cu and 0.4 g/t Au from 108m, 40m @ 0.4% Cu and 0.1 g/t Au from 157m, 56m @ 0.9% Cu and 0.2 g/t Au from 202m including: 2m @ 3.9% Cu and 0.8 g/t Au from 222m, 2m @ 3.2% Cu and 0.6 g/t Au from 229m, 2m at 1.4% Cu and 0.2 g/t Au from 250m, 2m @ 1.3% Cu and 0.2 g/t Au from 254m, 11m @ 0.9% Cu and 0.2 g/t Au from 262m including: 3m @ 2.1% Cu and 0.6 g/t Au from 262m, 14m @ 0.7% Cu and 0.2 g/t Au from 290m including: 1m @ 2.2% Cu and 1.1 g/t Au from 292m and 1m @ 1.5% Cu and 0.6 g/t Au from 295m.