i-80 GOLD CORP. announced the results of a Scoping Study completed by DRA Americas Inc. that was commission by the Company to provide preliminary capital and operating cost estimates for the potential restart of the existing Ruby Hill mill and leach circuits to operating status. The study was completed in two Parts to consider processing of oxide gold and/or base metal mineralization. Part 1 was to provide a preliminary estimate of capital and operating cost required for the potential restart of the existing process facilities at Ruby Hill for the processing of oxide mineralized material. Part 2 was to provide a preliminary estimate of the capital and operating cost required for converting the process plant from a mill/leach facility processing oxide gold mineralized material to a base metal flotation plant producing two concentrates (lead/silver and zinc concentrates). Capital estimates for the possible restart and conversion of the mill facility were developed at AACE Class 5 (Order of Magnitude) level, consistent with industry best practices for scoping studies. The Study was not specifically based on mineralized material from the Company's projects. The Study contemplates that Run-of-Mine (ROM) mineralized material would be fed to the existing primary and secondary crushing circuits. A radial stacker conveyor would feed a high-grade stockpile from where slot/tube feeders and a reclaim conveyor located in a reclaim tunnel would feed a tertiary crushing and screening circuit followed by a fine ore silo. The material would then be fed from the fine ore silo to the ball mill and classification circuit located in the mill building. The cyclone overflow would feed a new trash screen installed prior to the thickener. The thickener underflow would feed the leach tank, with leach tailings reporting to belt filters. The filter cake produced will deposit onto a conveyor feeding a new Agglomerator (Part of the Low-Grade Oxide circuit) for placement on the existing leach pad. The thickener overflow and filtrate would be fed to the carbon absorption columns (CIC circuit). Nameplate feed rates for the high grade and low-grade circuits are 298,297 and 867,107 tons per year respectively. According to the study, the preliminary estimate for the capital cost and associated Operating Cost estimates are provided in Tables 1 & 2 below. The Study contemplates that ROM material would be fed to the existing primary and secondary crushing circuit. A radial stacker conveyor would feed a stockpile in the same location as the High-Grade Oxide Stockpile in the Oxide Circuit. A reclaim tunnel conveyor would feed a tertiary crushing and screening circuit followed by a fine ore silo. The material would then flow from the fine ore silo to the ball mill and classification circuit located in the mill building.
It is contemplated that the flotation area would include sequential lead/silver and zinc flotation circuits, each consisting of a rougher followed by concentrate regrinding and three stages of cleaning. Lead concentrate, zinc concentrate and flotation tailings would each be dewatered and deposited in stockpiles. The tailings would be transported to a filtered tailings storage area (Lined Area) and would have a return pump feeding back captured solution to the flotation process water tank. Nameplate feed rates through the plant is 268,640 tons per annum.