Real-time Estimate Cboe BZX  -  05/23 01:27:41 pm EDT
5.575 USD   -0.45%
05/19INFINERA CORP : Change in Directors or Principal Officers, Submission of Matters to a Vote of Security Holders, Financial Statements and Exhibits (form 8-K)
05/10Asia-Africa-Europe-1 Consortium Selects Infinera's ICE6 Solution for Largest-scale Upgrade on a Submarine Cable System
05/10Asia-Africa-Europe-1 Consortium Selects Infinera’S Ice6 Solution for Largest-Scale Upgrade on A Submarine Cable System
SummaryMost relevantAll NewsAnalyst Reco.Other languagesPress ReleasesOfficial PublicationsSector news

Maximizing 800G Performance: The Power of Three

11/18/2021 | 10:03am EDT

Back in July of this year, I presented a Lightwave webinar on the What, How, and Why of 800G Generation Optical Engine Performance. In my first blog related to this webinar, Baud Rates and 800 Gb/s: Every Little Bit Helps (A Lot), I looked at the surprising relationship between baud rate and reach at 800 Gb/s, with a small increase in the baud rate having a disproportionate reach benefit. In a second blog, What the Heck Are "Modem SNR" and "Holistic Co-design"?, I explained the role of modem signal-to-noise ratio (SNR), the noise generated inside the optical engine, and described how holistic co-design of the optical engine's components and packaging are key to maximizing modem SNR. In this third blog, I will attempt to explain how the baud rate and modem SNR, together with innovative features, enable 800G generation optical engines such as ICE6 to maximize performance.

What Is Optical Performance? And Why Does It Matter?

There is no one definition of optical performance, and different parameters can be more or less important depending on the application, as shown in Table 1. Perhaps the most common parameter used to compare optical engines both within the same generation and between generations is wavelength capacity-reach. This means, for a given wavelength capacity, how far the wavelength can travel before reaching its post-forward error correction (FEC) effort-free limit and thus requiring termination or regeneration. This directly impacts optical network CapEx in terms of the number of coherent interfaces that are required and therefore the cost per bit. If optical engine A can deliver 800 Gb/s at the same distance compared to 400 Gb/s for optical engine B, then the cost per bit is reduced by 50%. Using fewer wavelengths/interfaces also provides a significant OpEx benefit, not just in terms of lower power consumption and smaller footprint, but also in terms of the operational costs of installation, provisioning, and management.

Table 1: Typical relative importance of key performance parameters

A second performance parameter is ROADM cascadeability. Passing through multiple ROADMs can have a more significant impact on reach than the actual distance itself, due to filter narrowing in the wavelength selective switches (WSSs) and the amplified spontaneous emission (ASE) noise added when amplifying the wavelength to compensate for losses inside the ROADM due to the WSSs, splitters, filters, etc. In metro networks, this can be the most important parameter, with these wavelengths passing through up to 15+ ROADMs in North America and up to 10+ ROADMs in Europe.

A third performance parameter is spectral efficiency. This can be especially important in long-haul networks, submarine networks, and other scenarios where the cost to acquire and light additional fiber is high, or where fiber availability is limited. Spectral efficiency defines how much effective data or transmission capacity can be achieved for a given amount of spectrum on a fiber or fiber pair. Spectral efficiency is a function itself of three things: the number of bits per symbol that a given modulation scheme can achieve for a given reach, the amount of overhead ,or in other words, how many of the bits are utilized for non-data payload transmission (like bits used in FEC), and how tightly the wavelengths can be squeezed together. Additional optical performance parameters that you may hear include transmit power, state-of-polarization rotation (i.e., lightning) tolerance, and out-of-band noise.

The Three Enablers of Superior 800G Generation Coherent Performance

ICE6, Infinera's 800G generation coherent optical engine, leverages three key enablers to maximize optical performance:

  1. An ultra-high baud rate
  2. Innovative features including Nyquist subcarriers, long-codeword probabilistic constellation shaping, dynamic bandwidth allocation, and SD-FEC gain sharing
  3. High modem SNR : low noise/distortions inside the optical engine when operating at high baud rates

Figure 1: The relative importance of performance enablers with data rate

However, as shown in Figure 1, the relative importance of these enablers can vary with the data rate and reach. At 800 Gb/s all three are critically important for maximum performance. However, at lower data rates with a higher tolerance to noise, high modem SNR becomes a little less critical. Likewise with fewer bits per symbol at lower data rates, the benefit of each extra Gbaud has a smaller benefit, as explained in my first blog.

What Performance Will I Really Get from Infinera's ICE6 Optical Engine?

Nominal wavelength capacity-reach, representing somewhat ideal conditions, is 950 km+ at 800 Gb/s, 2,500+ km at 600 Gb/s and 7,500+ km at 400 Gb/s. Public results include 800 Gb/s at 950 km; 800 Gb/s at 730 km and 700 Gb/s at 1,460 km at Windstream; and 800 Gb/s at 667 km, 600 Gb/s at 2,283 km, and 400 Gb/s at 4,091 km over the more challenging G.655 fiber at Verizon. At OFC 2021 in June, Infinera even published a joint paper with Corning, "Real-Time 100.4 GBd PCS-64QAM Transmission of a 1.6Tb/s Super-Channel Over 1600 km of G.654.E Fiber", describing a lab demonstration of 800 Gb/s over 1,600 km (16 x 100G spans with EDFA/Raman) over TXF fiber with a 2 dB margin, as shown in Figure 2.

Figure 2: OFC 2021 paper: 2 x 800Gb/s λ over 1,600 km with 2 dB Margin

In terms of ROADM cascadeability, ICE6 can support 20+ ROADM spans at 400 Gb/s with 100 GHz channel spacing. ICE6 has also demonstrated record-breaking submarine spectral efficiency over the MAREA cable, leveraging the programmability of ICE6 to maximize spectral efficiency by using multiple modes to reflect the varying performance in different parts of the fiber's C-band spectrum.

Table 2: Key factors influencing real-world optical engine performance

However, real-world performance is a function of both the optical engine and external penalties that accumulate along the wavelength's path, such as the noise generated in the amplifiers (i.e., OSNR), nonlinear penalties such as cross-phase modulation (XPM) and self-phase modulation (SPM), and penalties due to the limited passband of any individual WSS/filter and the filter narrowing effect that occurs due to WSS/filter cascade. Real-world optical engine performance will therefore be subject to many factors, including those listed in Table 2.

So, to summarize, optical performance is more than just wavelength capacity-reach. It is also about ROADM cascadeability and spectral efficiency, with the relative importance of each parameter varying with the use case. High baud rates, innovative features. and high modem SNR are the key performance enablers, with an ultra-high baud rate and high modem SNR being especially important for maximizing reach at 800 Gb/s. Together they can enable incredible performance, though actual, real-world performance will also depend on a large number of factors. To learn more about this important topic, download the Infinera white paper "Maximizing the Capacity-Reach of 800G Generation Coherent: Baud Rates, Features, and Modem SNR."


Infinera Corporation published this content on 18 November 2021 and is solely responsible for the information contained therein. Distributed by Public, unedited and unaltered, on 18 November 2021 15:02:05 UTC.

© Publicnow 2021
05/19INFINERA CORP : Change in Directors or Principal Officers, Submission of Matters to a Vote..
05/10Asia-Africa-Europe-1 Consortium Selects Infinera's ICE6 Solution for Largest-scale Upgr..
05/10Asia-Africa-Europe-1 Consortium Selects Infinera’S Ice6 Solution for Largest-Scale..
05/09INSIDER BUY : Infinera
05/04B. Riley Lowers Infinera's Price Target to $11 from $12.50, Notes Persistent Supply Cha..
05/04Citigroup Adjusts Infinera's Price Target to $9 From $10.50, Maintains Neutral Rating
05/04Globalconnect Carrier Delivers High-Speed 800G Transmission with Infinera's Ice6 Techno..
05/04GlobalConnect Carrier Delivers High-speed 800G Transmission with Infinera's ICE6 Techno..
05/03INFINERA CORP Management's Discussion and Analysis of Financial Condition and Results ..
05/03Infinera Corporation Reports Earnings Results for the First Quarter Ended March 26, 202..
More news
Analyst Recommendations on INFINERA CORPORATION
More recommendations
Financials (USD)
Sales 2022 1 534 M - -
Net income 2022 -72,5 M - -
Net Debt 2022 440 M - -
P/E ratio 2022 -14,7x
Yield 2022 -
Capitalization 1 205 M 1 205 M -
EV / Sales 2022 1,07x
EV / Sales 2023 0,94x
Nbr of Employees 3 225
Free-Float 98,9%
Duration : Period :
Infinera Corporation Technical Analysis Chart | MarketScreener
Full-screen chart
Technical analysis trends INFINERA CORPORATION
Short TermMid-TermLong Term
Income Statement Evolution
Mean consensus OUTPERFORM
Number of Analysts 12
Last Close Price 5,60 $
Average target price 9,14 $
Spread / Average Target 63,1%
EPS Revisions
Managers and Directors
David W. Heard Chief Executive Officer & Director
Nancy Louise Erba Chief Financial Officer
George Andrew Riedel Chairman
Craig S. Cocchi SVP-Operations for Optical Modules Group
Paul J. Milbury Independent Director
Sector and Competitors
1st jan.Capi. (M$)
CISCO SYSTEMS, INC.-32.24%178 380
ARISTA NETWORKS, INC.-28.60%31 640
NOKIA OYJ-17.33%27 396