• After evaluating several low Global Warming Potential (GWP) refrigerant alternatives on a variety of performance and market metrics, including safety, capacity efficiency, reliability, availability and longevity, the new refrigerant was chosen as the best solution to minimize environmental impact and energy use
  • This mandate applies only to new equipment specifically designed to utilize R454B to meet pending GWP limits
  • Reinforces Johnson Controls commitment to healthy people, healthy places and a healthy planet through the OpenBlue connected suite of technologies

MILWAUKEE - (May 27, 2021) - After extensive research, testing and evaluation, Johnson Controls, the global leader for smart, healthy and sustainable buildings, has selected R-454B, a lower global warming potential (GWP) refrigerant, to replace R-410A in its ducted residential and commercial unitary products as well as air-cooled scroll chillers. Systems using the new refrigerant will be available for Johnson Controls, YORK®, Luxaire®, Coleman®, Champion®, TempMaster®, Fraser-Johnston®, Guardian®, Evcon™ and Quantech® branded products in North America, as well as specific international markets where codes are in alignment.

This decision was made as the HVAC industry is preparing to phase out high-GWP refrigerants, such as R-410A, which are now being formally addressed by the Environmental Protection Agency (EPA) through the recently passed American Innovation and Manufacturing (AIM) Act1. The AIM Act directs the EPA to phase down U.S. hydrofluorocarbon (HFC) production and use by approximately 85 percent over the next 15 years.

'Utilizing R-454B was a clear decision, but one that took years of in-depth research, testing and evaluation.' - Chris Forth, executive director of regulatory, codes and environmental affairs, Ducted Systems, Johnson Controls

After evaluating several low-GWP alternatives on a variety of performance and market metrics, such as safety, capacity, efficiency, reliability, availability and longevity, Johnson Controls has determined R-454B to be the best-in-class2 replacement refrigerant - a decision echoed by other leading HVAC manufacturers. R454B has the lowest EPA SNAP3 approved GWP for unitary applications of all ASHRAE classified A2L (low-toxicity, mild flammability) refrigerants on the market today, coming in at 466. This is one-fifth the GWP of R-410A, far lower than the pending 750 GWP limits being proposed and offering the longest-term viability.

'Utilizing R-454B was a clear decision, but one that took years of in-depth research, testing and evaluation,' said Chris Forth, executive director of regulatory, codes and environmental affairs, Ducted Systems, Johnson Controls. 'This decision maximizes environmental benefits, which will help to avoid, if not completely avert, a second, near-term transition for the unitary sector. As the AIM Act phase-down schedule progresses, higher-GWP fluids such as R-32, while viable today, have the potential to be eliminated as an option due to their high-GWP values. Johnson Controls will continue to evaluate lower-GWP alternatives for future possibilities.'

In addition to reducing environmental impact, R-454B is more compatible with existing R-410A equipment designs, requires less or similar refrigerant charge and can reduce the energy use of HVAC systems and improve system efficiency. The similar operating characteristics with R410A will make for a smoother transition for distributors, wholesalers and contractors.

'It's important to note that these pending mandates from the EPA and the California Air Resources Board (CARB) would only apply to the sale of new residential and commercial unitary equipment as well as air-cooled scroll chillers. As the pending regulations stipulate a specific manufacturing cutoff date of January 1, 2025, for residential and light commercial unitary products and January 1, 2024, for air-cooled scroll chillers, existing R410A equipment built prior to that date can be sold and installed indefinitely,' said Forth. 'EPA and CARB are scheduled to begin their formal rule-making processes this year, which will determine how long of a servicing period will be granted for R410A equipment currently in service.'

As we approach the refrigerant transition cutoff dates, safety standards and building codes must be updated prior to a widespread market introduction of mildly flammable, low-toxicity A2L refrigerants such as R454B. Extensive, multi-year research and testing has been conducted by ASHRAE, AHRTI4 and others to ensure A2Ls can be safely deployed. Proper training will be critical to ensure the safe use, transportation and storage of A2L refrigerants. Johnson Controls is committed to ensuring the safe transition to R-454B by providing in-depth training for its contractors and technicians prior to the pending refrigerant transition dates.

1https://www.epa.gov/climate-hfcs-reduction/aim-act
2 Lowest GWP rating of EPA SNAP approved alternatives, as of the publishing of this notice.
3https://www.epa.gov/snap/fact-sheet-proposed-rule-23-protection-stratospheric-ozone-listing-substitutes-under
4 Air-Conditioning, Heating and Refrigeration Technology Institute

###

About Johnson Controls
At Johnson Controls (NYSE:JCI), we transform the environments where people live, work, learn and play. As the global leader in smart, healthy and sustainable buildings, our mission is to reimagine the performance of buildings to serve people, places and the planet.

With a history of more than 135 years of innovation, Johnson Controls delivers the blueprint of the future for industries such as healthcare, schools, data centers, airports, stadiums, manufacturing and beyond through its comprehensive digital offering, OpenBlue. With a global team of 100,000 experts in more than 150 countries, Johnson Controls offers the world's largest portfolio of building technology, software as well as service solutions with some of the most trusted names in the industry. For more information, visit www.johnsoncontrols.com or follow us @johnsoncontrols on Twitter.


Attachments

  • Original document
  • Permalink

Disclaimer

Johnson Controls International plc published this content on 27 May 2021 and is solely responsible for the information contained therein. Distributed by Public, unedited and unaltered, on 27 May 2021 14:45:04 UTC.