Forward-Looking Statements
Certain statements in this Quarterly Report on Form 10-Q (this "Form 10-Q"), or incorporated by reference in this Form 10-Q, ofOnto Innovation Inc. (referred to in this Form 10-Q, together with its consolidated subsidiaries, unless otherwise specified or suggested by the context, as the "Company," "Onto Innovation ," "we," "our" or "us") may be considered "forward-looking statements" or may be based on "forward-looking statements," including, but not limited to, those concerning:
• anticipated effects of, and future actions to be taken in response to,
the COVID-19 pandemic; • our business momentum and future growth;
• technology development, product introduction and acceptance of our
products and services;
• our manufacturing practices and ability to deliver both products and services consistent with our customers' demands and expectations and to strengthen our market position, including our ability to source components, materials, and equipment due to supply chain delays or shortages; • our expectations of the semiconductor market outlook;
• future revenue, gross profits, research and development and engineering
expenses, selling, general and administrative expenses, and cash requirements; • our dependence on certain significant customers and anticipated trends and developments in and management plans for our business and the markets in which we operate; and • our ability to be successful in managing our cost structure and cash expenditures and results of litigation. Statements contained or incorporated by reference in this Form 10-Q that are not purely historical are forward-looking statements and are subject to safe harbors under Section 27A of the Securities Act of 1933, as amended, Section 21E of the Securities Exchange Act of 1934, as amended (the "Exchange Act"), and the Private Securities Litigation Reform Act of 1995. Forward-looking statements may be identified by words such as, but not limited to, "anticipate," "believe," "continue," "estimate," "expect," "intend," "plan," "should," "may," "could," "will," "would," "forecast," "project" and words or phrases of similar meaning, as they relate to our management or us. Forward-looking statements contained herein reflect our current expectations, assumptions and projections with respect to future events and are subject to certain risks, uncertainties and assumptions, such as those identified in Part II, Item 1A. "Risk Factors" and elsewhere in this Form 10-Q. Actual results may differ materially and adversely from those included in such forward-looking statements. Forward-looking statements reflect our position as of the date of this Form 10-Q and we undertake no obligation to update any forward-looking statements, whether as a result of new information, future events or otherwise, except as required by law.
Critical Accounting Policies and Estimates
The preparation of condensed consolidated financial statements and related disclosures in conformity with accounting principles generally accepted inthe United States ("U.S. GAAP") requires management to make judgments, assumptions and estimates that affect the amounts reported. Certain of these significant accounting policies are considered to be critical accounting policies, as defined below. A critical accounting policy is defined as one that is both material to the presentation of our condensed consolidated financial statements and requires management to make difficult, subjective or complex judgments that could have a material effect on our financial condition or results of operations. Specifically, these policies have the following attributes: (1) we are required to make judgments and assumptions about matters that are highly uncertain at the time of the estimate; and (2) different estimates we could reasonably have used, or changes in the estimate that are reasonably likely to occur, could have a material effect on our financial position and results of operations. Estimates and assumptions about future events and their effects cannot be determined with certainty. We base our estimates on historical experience and on various other assumptions believed to be applicable and reasonable under the circumstances. These estimates may change as new events occur, as additional information is obtained and as our operating environment changes. In addition, management is periodically faced with uncertainties, the outcomes of which are not within our control and will not be known for prolonged periods of time. Certain of these uncertainties are discussed in our Annual Report on Form 10-K for the fiscal year endedJanuary 1, 2022 (the "2021 Form 10-K") filed with theSecurities and Exchange Commission onFebruary 25, 2022 in the Items entitled "Risk Factors" and "Management's Discussion and Analysis of Financial Condition and Results of Operations." Based on a critical assessment of our accounting policies and the underlying judgments and uncertainties affecting the application of those policies, we believe that our condensed consolidated financial statements are fairly stated in accordance withU.S. GAAP and provide a fair presentation of our financial position and results 17 --------------------------------------------------------------------------------
Table of Contents
of operations. There have been no material changes in our critical accounting policies and estimates from the information presented in Part II, Item 7. "Management's Discussion and Analysis of Financial Condition and Results of Operations," in the 2021 Form 10-K.
For more information, please see our critical accounting policies and estimates as previously disclosed in our 2021 Form 10-K and recent accounting pronouncements discussed in Note 1 to the Condensed Consolidated Financial Statements.
Executive Summary
We are a worldwide leader in the design, development, manufacture and support of process control tools that perform macro-defect inspection and metrology, lithography systems, and process control analytical software used by semiconductor and advanced packaging device manufacturers. We deliver comprehensive solutions throughout the semiconductor fabrication process with our families of proprietary products that provide critical yield-enhancing information, enabling microelectronic device manufacturers to drive down costs and time to market of their devices. We provide process and yield management solutions used in both wafer processing facilities, often referred to as "front-end" manufacturing, and in device packaging and test facilities, commonly referred to as "back-end" manufacturing. Our advanced process control software portfolio includes powerful solutions for standalone tools, groups of tools, or factory-wide suites to enhance productivity and achieve significant cost savings. Our principal market is semiconductor capital equipment. Semiconductors packaged as integrated circuits, or "chips," are used in consumer electronics, server and enterprise systems, mobile computing (including smart phones and tablets), data storage devices, and embedded automotive and control systems. Our core focus is the measurement and control of the structure, composition, and geometry of semiconductor devices as they are fabricated on silicon wafers to improve device performance and manufacturing yields. Our products and services are used by our customers who manufacture many types of integrated circuits for a multitude of applications, each having unique manufacturing challenges. This includes integrated circuits to enable information processing and management (logic integrated circuits), memory storage (NAND, 3D-NAND, NOR, and DRAM), analog devices (e.g., Wi-Fi and 5G radio integrated circuits, power devices), MEMS sensor devices (accelerometers, pressure sensors, microphones), image sensors, and other end markets including components for hard disk drives, LEDs, and power management. The semiconductor and electronics industries have also been characterized by constant technological innovation. We believe that, over the long term, our customers will continue to invest in advanced technologies and new materials to enable smaller design rules and higher density applications that fuel demand for process control equipment.
The following table summarizes certain key financial information for the periods indicated below (in thousands, except per share and percent data):
Three Months Ended July 2, April 2, June 26, 2022 2022 2021 Revenue$ 256,310 $ 241,350 $ 193,387 Gross profit$ 132,127 $ 131,023 $ 105,456 Gross profit as a percent of revenue 52 % 54 % 55 % Total operating expenses$ 74,676 $ 72,279 $ 69,515 Net income$ 51,575 $ 53,330 $ 35,051 Diluted earnings per share$ 1.03 $ 1.07 $ 0.71
• In the fiscal quarter ended
revenue increased 6.2% compared to the fiscal quarter endedApril 2, 2022 (the "April 2022 quarter"), primarily due to an increase in sales to OSAT customers in specialty device advance packaging and flash memory customers for advanced nodes applications, partially offset by a decline in sales DRAM and Foundry customers in advanced nodes applications. • Gross profit as a percentage of revenue in theJuly 2022 quarter
compared to the
lithography systems with lower margins in the
increased manufacturing costs to support the growth of our business.
• The increase in operating expenses in the
theApril 2022 quarter is primarily due to increases in headcount and variable compensation. 18
--------------------------------------------------------------------------------
Table of Contents
Our cash, cash equivalents and marketable securities balance increased to$545.0 million at the end of theJuly 2022 quarter compared to$511.3 million at the end of theJanuary 2022 quarter. This increase was primarily the result of$55.4 million of cash generated from operating activities. This source of cash was partially offset by net cash of$6.9 million used for capital expenditures. Employee headcount as ofJuly 2, 2022 was approximately 1,500.
Key Events
Impact of the COVID-19 Pandemic on Our Business. As of the filing of this Form 10-Q, our operations have been impacted by our pandemic response, as described below, given the global nature of our workforce and our operations. The ultimate extent to which COVID-19 will impact our business depends on future developments, which are highly uncertain and very difficult to predict, including the effectiveness and utilization of vaccines for COVID-19 and its variants, new information that may emerge concerning the severity of COVID-19 and its variants, and actions to contain or limit their spread. We have prioritized the health and safety of our employees and customers in our pandemic response. As governmental authorities continue to implement or modify restrictions on commercial operations, we have continued to ensure compliance with these directives while also maintaining business continuity for our essential operations. We have a global workforce. Although our manufacturing facilities are inthe United States , we maintain offices and have employees inthe United States ,South Korea ,Japan ,Taiwan ,China ,Singapore andEurope . Our operations at these offices are subject to various governmental directives and, as a result thereof, we have instituted a work-from-home policy for these employees to the extent practical. Where our essential employees are required to continue to report to work to perform their responsibilities, we have implemented staggered shifts or otherwise adjusted work schedules to maximize our operating capacity while adhering to applicable restrictions, including recommended distancing between persons. We have also provided our essential employees with appropriate protective equipment and have enhanced and increased cleanings at our facilities. At this time, we have not experienced any reduction in productivity, though we have incurred certain costs related to the implementation of these policies and practices. In addition, we have enhanced our email screening and cyber monitoring of our devices to further support our hybrid work environments. As certain countries have relaxed restrictions over the past few months, we have restarted certain activities in accordance with local guidelines. We may take further actions that we determine to be in the best interests of our employees or as may be required by federal, state, or local authorities. To date, the COVID-19 pandemic has disrupted the way that we conduct business but has not had a material adverse impact on our operations. We have experienced some delays in customer deliveries. Additionally, we are impacted by the global shortage in electronic components and inflationary pressures. Our supply chain is strained in some cases as the availability of materials, logistics and freight options are challenging in many jurisdictions, which have resulted in long lead times, rising prices and supply chain disruptions. We expect supply chain shortages as well as inflationary cost pressures to persist throughout the remainder of the year. Demand for our products was consistent with or exceeded our expectations for the first half of fiscal 2022. However, further disruptions to our supply chain in connection with the sourcing of materials, inflationary pressures, equipment and engineering support, and services from geographic areas that have been impacted by COVID-19 may pose risks to our business, results of operations and financial condition. In this time of uncertainty as a result of the COVID-19 pandemic, we are continuing to serve our customers while taking appropriate precautionary measures to provide a safe work environment for our employees and customers. The full extent of the pandemic's effect on our operational and financial performance will depend in large part on future developments, which cannot be predicted with confidence at this time. Future developments include the duration, scope and severity of the pandemic, the severity of newly identified strains of COVID-19, the actions taken to contain or mitigate its impact, such as the extent of restrictions on gatherings and travel, the impact on governmental programs and budgets, the development, administration, efficacy and public utilization of treatments and vaccines, and the resumption of widespread economic activity, and the pace of recovery, including with respect to supply chain shortage. Trade tensions betweenthe United States andChina may escalate as a result of COVID-19 or otherwise and could result in the imposition of additional tariffs, trade restrictions or policy changes, any of which could increase costs of our product components and pricing of, and consumer demand for, our products, which could have a negative effect on our results of operations.
Although the inherent uncertainty of the ongoing crisis makes it difficult to predict with any confidence the likely impact on our future operations, the COVID-19 pandemic could have a material adverse impact on our consolidated business, results of operations and financial condition.
For a discussion of certain risks related to the international nature of our business and our operations and the COVID-19 pandemic, see Part II, Item 1A - Risk Factors of this Form 10-Q, Part I, Item 1A - Risk Factors of our 2021 Form 10-K.
Results of Operations for the Three and Six Months Ended
Revenue. Our revenue is primarily derived from the sale of our systems, software licensing, services and spare parts. Our revenue of$256.3 million increased 32.5% for the three months endedJuly 2, 2022 as compared to the same period in 19 --------------------------------------------------------------------------------
Table of Contents
2021, in which revenue totaled$193.4 million . For the six-month periods endedJuly 2, 2022 andJune 26, 2021 , our revenue totaled$497.7 million and$362.7 million , respectively, representing a year-over-year increase of 37.2%.
The following table lists, for the periods indicated, the different sources of our revenue in dollars (thousands) and as percentages of our total revenue:
Three Months Ended Six Months Ended July 2, June 26, July 2, June 26, 2022 2021 2022 2021 Systems and software$ 220,786 86 %$ 162,898 84 %$ 430,170 86 %$ 304,407 84 % Parts 22,756 9 % 18,697 10 % 42,613 9 % 36,115 10 % Services 12,768 5 % 11,792 6 % 24,877 5 % 22,144 6 % Total revenue$ 256,310 100 %$ 193,387 100 %$ 497,660 100 %$ 362,666 100 % Total systems and software revenue increased$57.9 million and$125.8 million for the three and six months endedJuly 2, 2022 , respectively, as compared to the three and six months endedJune 26, 2021 , respectively, primarily due to increases of units shipped in our metrology, inspection and lithography product lines. The increases in parts and services revenue for the three and six months endedJuly 2, 2022 , as compared to the three and six months endedJune 26, 2021 , were primarily due to servicing a larger installed base. Parts and services revenue is generated from part sales, maintenance service contracts, and system upgrades, as well as time and material billable service calls. Gross Profit. Our gross profit has been and will likely continue to be affected by a variety of factors, including manufacturing efficiencies, provision for excess and obsolete inventory, pricing by competitors or suppliers, new product introductions, production volume, customization and reconfiguration of systems, international and domestic sales mix, system and software product mix and parts and service margins. Our gross profit was$132.1 million and$263.2 million for the three and six months endedJuly 2, 2022 , respectively, as compared to$105.5 million and$195.9 million for the three and six months endedJune 26, 2021 , respectively. Our gross profit represented 51.5% and 52.9% of our revenue for the three and six months endedJuly 2, 2022 , respectively, and 54.5% and 54.0% for the three and six months endedJune 26, 2021 , respectively. The decreases in gross profit as a percentage of revenue for both the three and six months endedJuly 2, 2022 , as compared to the three and six months endedJune 26, 2021 , were primarily due to product mix, higher freight and logistics costs, and higher personnel cost due to an increase in headcount to provide manufacturing capacity requirements, partially offset by an increase in sales volume.
Operating Expenses.
Our operating expenses consist of:
• Research and Development. We believe that it is critical to continue to
make substantial investments in research and development to ensure the availability of innovative technology that meets the current and projected requirements of our customers' most advanced designs. We have
maintained and intend to continue our commitment to investing in research
and development in order to continue to offer new products and
technologies. Accordingly, we devote a significant portion of our
technical, management and financial resources to research and development
programs. Research and development expenditures consist primarily of salaries and related expenses of employees engaged in research, design and development activities. They also include consulting fees, the cost
of related supplies and legal costs to defend our patents. Our research
and development expenses were$25.6 million and$52.0 million for the three and six months endedJuly 2, 2022 , respectively, as compared to$25.5 million and$47.5 million for the three and six months endedJune 26, 2021 , respectively. The increases in research and development expenses for both the three and six months endedJuly 2, 2022 , as
compared to the three and six months ended
due to increased compensation costs from additional headcount, as well as
annual merit and promotion increases, and increased consulting, outside
service and material expenses for new product initiatives.
• Sales and Marketing. Sales and marketing expenses are primarily comprised
of salaries, commissions and related costs for sales and marketing
personnel, as well as other non-personnel related expenses. Our sales and
marketing expenses were
six months ended
and
respectively. The increases in sales and marketing expenses for both the
three and six months ended
months ended
costs and increased travel related expenses as pandemic travel restrictions were lifted. 20
--------------------------------------------------------------------------------
Table of Contents
• General and Administrative. General and administrative expenses are primarily comprised of salaries and related costs for corporate and administrative personnel, as well as other non-personnel related
expenses. Our general and administrative expenses were
respectively, as compared to
three and six months ended
general and administrative expenses for both the three and six months endedJuly 2, 2022 , as compared to the three and six months endedJune 26, 2021 , were primarily due to increased compensation costs and increased litigation expenses. • Amortization of Identifiable Intangible Assets. Amortization of
identifiable intangible assets was
the three and six months ended
$12.3 million and$24.7 million for the three and six months endedJune 26, 2021 , respectively. The increases in amortization expense for both
the three and six months ended
six months ended
and development becoming classified as a finite-lived intangible asset and amortization commencing in the second half of 2021. Interest income, net. Net interest income was$0.7 million and$1.0 million for the three and six months endedJuly 2, 2022 , respectively, as compared to$0.3 million and$0.7 million for the three and six months endedJune 26, 2021 , respectively. The increases in net interest income for both the three and six months endedJuly 2, 2022 , as compared to the three and six months endedJune 26, 2021 , were due to higher interest rates during the 2022 period. Other expense, net. Net other expense was$0.9 million and$1.1 million for the three and six months endedJuly 2, 2022 , respectively, as compared to$0.3 million and$1.5 million for the three and six months endedJune 26, 2021 , respectively. The increase in other expense, net for the three months endedJuly 2, 2022 , as compared to the three months endedJune 26, 2021 , was primarily due to higher foreign exchange losses during the 2022 period. The decrease in other expense, net for the six months endedJuly 2, 2022 , as compared to the six months endedJune 26, 2021 , was primarily due to lower foreign exchange losses during the 2022 period. Income Taxes. We recorded an income tax provision of$5.7 million and$11.3 million for the three and six months endedJuly 2, 2022 , respectively, as compared to income tax provision of$0.9 million and$3.4 million for the same period in 2021. Our effective tax rate of 10% differs from the statutory rate of 21% for both the three and six months endedJuly 2, 2022 , primarily due to (i) research and development tax credits, (ii) the deduction related to foreign derived intangible income ("FDII"), and (iii) excess tax benefits associated with equity compensation. Our effective tax rate of 3% and 5% differs from the statutory rate of 21% for the three and six months endedJune 26, 2021 , respectively, primarily due to (i) foreign and research and development tax credits, (ii) the deduction related to FDII, (iii) excess tax benefits associated with equity compensation, and (iv) a one-time tax benefit associated with a release of reserves due to the expiration of the applicable statute of limitations. Our future effective income tax rate depends on various factors, such as possible changes in tax legislation, the geographic composition of our pre-tax income, the amount of our pre-tax income as business activities fluctuate, non-deductible expenses incurred in connection with business combinations, and research and development tax credits as a percentage of aggregate pre-tax income. We currently have a partial valuation allowance recorded for certain foreign and state loss and credit carryforwards where the realizability of such deferred tax assets is substantially in doubt. Each quarter we assess the likelihood that we will be able to recover our deferred tax assets primarily relating to state research and development credits. We consider available evidence, both positive and negative, including historical levels of income, expectations and risks associated with estimates of future taxable income and ongoing prudent and feasible tax planning strategies in assessing the need for a valuation allowance. As a result of our analysis, we concluded that it is more likely than not that a portion of our net deferred tax assets will not be realized. Therefore, we continue to provide a valuation allowance against certain net deferred tax assets. We continue to monitor available evidence and may reverse some or all of the valuation allowance in future periods, if appropriate. Beginning in 2022, theU.S. Tax Cuts and Jobs Act of 2017 ("TCJA") eliminated the existing option to deduct research and development expenditures and requires taxpayers to amortize them over five years pursuant to IRC Section 174. While the capitalization requirement has a negative impact on our cash flows, there are offsetting benefits from the enactment of this provision that we have included in our estimated annual effective tax rate. While it is possible thatCongress may defer, modify, or repeal this provision, potentially with retroactive effect, we have no assurance that this provision will be deferred, modified, or repealed. Changes in our tax provisions or an increase in our tax liabilities, whether due to changes in applicable laws and regulations, the interpretation or application thereof, or a final determination of tax audits or litigation or agreements, could have a material adverse effect on our financial position, results of operations and/or cash flows.
Liquidity and Capital Resources
21 --------------------------------------------------------------------------------
Table of Contents
AtJuly 2, 2022 , we had$545.0 million of cash, cash equivalents and marketable securities and$909.0 million in working capital. AtJanuary 1, 2022 , we had$511.3 million of cash, cash equivalents and marketable securities and$793.6 million in working capital.
Net cash and cash equivalents provided by operating activities for the six
months ended
• The net cash and cash equivalents provided by operating activities
during the six months endedJuly 2, 2022 resulted primarily from
net
income, adjusted to exclude the effect of non-cash operating
charges of
$143.0 million , partially offset by a decrease in cash provided from operating assets and liabilities of$87.6 million , primarily due to increases in inventories and accounts receivable.
• The net cash and cash equivalents provided by operating activities
during the six months endedJune 26, 2021 resulted primarily
from net
income, adjusted to exclude the effect of non-cash operating
charges,
of$108.1 million , partially offset by a decrease in cash
provided from
operating assets and liabilities of$31.7 million .
Net cash and cash equivalents used in investing activities for the six months
ended
• During the six months ended
used in investing activities included purchases of marketable securities of$174.7 million and capital expenditures of$6.9 million , partially offset by proceeds from sales of marketable securities of$148.4 million . • During the six months endedJune 26, 2021 , net cash and cash equivalents used in investing activities included purchases of marketable securities of$142.1 million , purchase of a business of$26.8 million and capital expenditures of$9.6 million , partially offset by proceeds from sales of marketable securities of$102.0 million .
Net cash and cash equivalents used in financing activities for the six months
ended
• During the six months ended
cash to primarily pay taxes related to shares withheld for
share-based
compensation plans of$8.3 million and pay contingent
consideration for
acquired business of$2.3 million , partially offset by proceeds from sales of shares through share-based compensation plans of$4.5 million .
• During the six months ended
cash primarily for tax payments related to shares withheld for share-based compensation plans of$3.2 million . This use of cash
was
primarily offset by proceeds from sales of shares through
share-based
compensation plans of$6.5 million . From time to time, we evaluate whether to acquire new or complementary businesses, products or technologies. We may fund all of or a portion of the price of these investments or acquisitions in cash, stock, or a combination of cash and stock. In the first quarter of 2021, the Company acquiredInspectrology, LLC for$24.0 million in cash and an earnout subject to the achievement of certain revenue targets earned for fiscal 2021 through 2022. The earnout achieved for fiscal 2021 was$2.3 million and was paid in the first half of fiscal 2022. There is potential earnout for up to an additional payment of$5.0 million depending on fiscal 2022 results. As ofJuly 2, 2022 , we have accrued$2.2 million for the potential earnout. InNovember 2020 , the Onto Innovation Board of Directors approved a share repurchase authorization, which allows the Company to repurchase up to$100 million worth of shares of its common stock. Repurchases may be made through both public market and private transactions from time to time with shares purchased being subsequently retired. AtJuly 2, 2022 , there was$100 million available for future share repurchases. We have a credit agreement with a bank that provides for a line of credit that is secured by the marketable securities we have with the bank. We are permitted to borrow up to 70% of the value of eligible securities held at the time the line of credit is accessed. As ofJuly 2, 2022 , the available line of credit was approximately$125.2 million with an available interest rate of 3.3%. The credit agreement is available to us until such time that either party terminates the arrangement at its discretion. To date, we have not utilized the line of credit. Our future capital requirements will depend on many factors, including the timing and amount of our revenue and our investment decisions, which will affect our ability to generate additional cash. In addition, although the ultimate impact of the COVID-19 pandemic and its effects on economic conditions and the global supply chain on our future results remains uncertain, we believe our business model and our current cash reserves leave us well-positioned to manage our business through this crisis as it continues to unfold. We expect that our existing cash, cash equivalents, marketable securities and availability under our line of credit will be sufficient to meet our anticipated cash requirements for working capital, capital expenditures and other cash needs for the next 12 months following the filing of this Form 10-Q. Thereafter, if cash generated 22 --------------------------------------------------------------------------------
Table of Contents
from operations and financing activities is insufficient to satisfy our working capital requirements, we may seek additional funding through bank borrowings, sales of securities or other means. However, the ongoing COVID-19 pandemic has in the past caused disruption in the capital markets and were it to do the same in the future, may have an impact on our ability to access such additional funding. In addition, a reduction in or volatility with respect to our stock price or a general market downturn could materially impact our ability to sell securities on favorable terms or at all. There can be no assurance that we will be able to raise any such capital on terms acceptable to us or at all.
© Edgar Online, source