Puma Exploration Inc. provide additional results, which include very high-grade gold assays of 199 g/t Au, 192 g/t Au, and 170.5 g/t Au, from the 2021 field exploration surface sampling program on the 100% controlled Williams Brook Gold Property in New Brunswick, Atlantic Canada. The first 380 surface grab samples received, so far, illustrate perfectly the very high-grade gold enrichment contact between the sediments and the rhyolite. The arithmetic average of the 380 new samples collected is 3.14 g/t Au which includes all the results from below detection limit to a maximum value of 199 g/t Au. A total of 103 samples returned values over 0.3 g/t Au including 66 that assayed better than 1.0 g/t Au. The assay results from an additional 214 samples from the current systematic surface sampling program between the Lynx and Chubby Gold Zones are still pending and are shown on Figure 1 towards the Chubby Gold Zone. INAUGURAL DRILLING PROGRAM AT WILLIAMS BROOK GOLD PROJECT: The core-oriented maiden drill campaign was completed on August 20, 2021. It consisted of 18 holes for a total of 2,360 meters that tested a 200-meter segment of the 700-meter-long O’Neil Gold Trend (OGT). The assay results for the first six holes were released mid-September and all six (6) holes intersected significant gold mineralisation including the discovery hole WB21-02 that cut 5.55 g/t Au over 50.15 meters from surface, including 9.88 g/t Au over 8.60 meters and 46.94 g/t Au over 3.85 meters. The assays are pending for the remaining 12 drill holes. Puma's technical team continues to better define and extend the gold zones on surface by prospecting, trenching, stripping, and intense sampling in preparation for the next drilling campaign scheduled for later in 2021. Also, a ground IP geophysical test survey is in progress over the OGT to see if the high-grade gold zones have a specific geophysical signature. O’NEIL GOLD TREND (OGT): The O’Neil Gold Trend (OGT) is a pervasive altered and brecciated rhyolite unit hosting significant gold showings and occurrences followed by trenching and drilling over a strike length of 700 meters. The geophysical signature of the OGT is expressed over 7km. The favourable unit (rhyolite) is similar and parallel to the structures hosting the “Williams 1” and “Williams 2” Gold Zones where previous operator drilled in 2008, 54.2 g/t Au over 2.8 meters and 1 g/t Au over 23 meters. These trends are interpreted to be related to a major rifting in the New Brunswick Geological events and could represent a low sulphidation epithermal gold system. Along the OGT, the width of the rhyolite varies from 5 to 250 meters with an average apparent thickness of 150 meters. Discovery hole WB21-02 intersected 5.55 g/t Au over 50.15 meters from surface. The mineralised and altered zone drilled includes two main high-grade intercepts of 9.88 g/t Au over 8.60 meters and 46.94 g/t Au over 3.85 meters. All the six (6) first holes intersected significant high-grade gold quartz veins and quartz networks within the altered and mineralised rhyolite. High-Grade Selected Grab Samples Assays on the Prolific O’Neil Gold Trend (OGT)*: O’Neil Gold Zone: 128.5 g/t Au, 44.4 g/t Au, 38.8 g/t Au,32.8 g/t Au, 23.1 g/t Au - Pepitos Gold Zone: 52.1 g/t Au, 16.1 g/t Au, 15.0 g/t Au, 13.1 g/t Au, 4.87 g/t Au - Lynx Gold Zone: 241.0 g/t Au, 79.8 g/t Au, 74.2 g/t Au, 63.5 g/t Au, 58.4 g/t Au - Chubby Zone Area: 3.5 g/t Au, 1.2 g/t Au, 1.2 g/t Au, 0.45 g/t Au. Moose Gold Zone: 2.4 g/t Au, 2.1 g/t Au, 1.3 g/t Au, 1.1 g/t Au. QUALIFIED PERSONS: Dominique Gagné, PGeo, independent qualified person as defined by Canadian National Instrument 43-101 standards, has reviewed and approved the geological information reported in this news release. Neither TSX Venture Exchange nor its Regulation Services Provider (as that term is defined in the policies of the TSX Venture Exchange) accepts responsibility for the adequacy or accuracy of this release. Mr. Gagné is independent of the Company. QUALITY ASSURANCE/QUALITY CONTROL (QA/QC): Rock samples were bagged, sealed and sent to the facility of ALS CHEMEX in Moncton, New Brunswick where each sample is dried, crushed, and pulped. The samples were crushed to 70% less than 2mm, riffle split off 1kg, pulverise split to better than 85% passing 75 microns (Prep-31B). A 30-gram subsplit from the resulting pulp was then subjected to a fire assay (Au-ICP21). Other screen sizes available. Duplicate 50g assay on screen undersize. Assay of entire oversize fraction.