QMines Limited provided the following results from its current RC and diamond drilling programs at its Mt Chalmers Project, located 17km north-east of Rockhampton in Queensland. Peak grades have been intersected in multiple drill holes from the diamond drilling program, including 11.75g/t Au and 5.3% Cu from MCDD030 and 1.15g/t Au, 243g/t Ag, 3% Cu, 19% Pb and 33% Zn from MCDD020. During October and November 2021, QMines has completed an additional fifteen diamond tails from RC pre-collars drilled with assay results from twelve holes having now been received for a total of 2,182 metres. The drilling program is now focussing on step out and extensional drilling outside the current resource. The current drilling program has completed three further diamond tails with drillholes MCDD034 and MCDD035 now underway and two drill rigs onsite in operation. The RC and diamond drilling programs have been designed to expand the resource model, with several step out holes having now been drilled on the western, southern and eastern sides of the open pits. The drillholes reported here are largely outside the current resource wireframe, with additional pre-collars drilled ready to complete diamond tails. Examples of the recent mineralised intersections can be seen in Sections AA', BB' and CC', with several drillholes, including MCDD20, MCDD30 and MCDD036/PC018, intersecting high-grade mineralisation. The Company is drilling several holes in previously untested areas on the western side of the main pit and behind previously reported drillholes MCDD015 and MCDD014?. Drill hole MCDD030 intersected high-grade mineralisation at 96.4 metres down hole. MCDD030 intersected 35.3 metres of chalcopyrite stringer mineralisation returning 2.75g/t Au and 1.4% Cu with a high-grade section of 5.5 metres at 9.91g/t Au and 4% Cu from 96.4 meters. MCDD031 has been drilled 50m to the east of MCDD030 and is has been cut for sampling.