Highlights – Drill Results from the El Domo Deposit at Curipamba:
- CURI-373 intersected 67.00 metres of 3.38% copper, 1.11 g/t gold, 0.41% zinc, 15.8 g/t silver, and 0.06% lead for 4.35% copper equivalent ("CuEq") – including 9.11 metres of 11.65% copper, 2.41 g/t gold, 0.16% zinc, 44.7 g/t silver, and 0.03% lead for 13.58% CuEq
- CURI-374 intersected 5.56 metres of 2.32% copper, 15.37 g/t gold, 21.91% zinc, 403.0 g/t silver, and 3.09% lead for 22.58% CuEq – including 3.46 metres of 3.38% copper, 24.25 g/t gold, 34.44% zinc, 641.2 g/t silver, and 4.79% lead for 35.35% CuEq
Drill hole CURI-372 intersected semi-massive sulphide from 70.78 to 72.57 metres, grading 0.78% copper, 8.60 g/t gold, 7.84% zinc, 590.4 g/t silver, and 3.29% lead (14.45% CuEq). A section of mineralized footwall felsic autoclastic volcanic rocks was intersected from 72.57 to 78.78 metres, grading 0.13% copper, 1.41 g/t gold, 1.80% zinc, and 45.5 g/t silver and 0.33% lead (2.01% CuEq). Deeper in the mineralized footwall felsic volcanic rocks additional semi-massive to massive sulphide mineralization was intersected from 86.10 to 95.00 metres, grading 2.65% copper, 0.80 g/t gold, 1.46% zinc, 12.4 g/t silver and 0.04% lead (3.70% CuEq). A higher-grade subset was intersected from 87.75 to 89.81 metres, grading 6.71% copper, 0.44 g/t gold, 2.58% zinc, 17.9 g/t silver, and 0.01% lead (7.91% CuEq).
Drill Hole | From | To | Thickness | Cu | Au | Zn | Ag | Pb | CuEq (1) | Approx. True |
CURI-372 | 70.78 | 72.57 | 1.79 | 0.78 | 8.60 | 7.84 | 590.4 | 3.29 | 14.45 | 1.52 |
72.57 | 78.78 | 6.21 | 0.13 | 1.41 | 1.80 | 45.5 | 0.33 | 2.01 | 5.28 | |
86.10 | 95.00 | 8.90 | 2.65 | 0.80 | 1.46 | 12.4 | 0.04 | 3.70 | 7.57 | |
Including | 87.75 | 89.81 | 2.06 | 6.71 | 0.44 | 2.58 | 17.9 | 0.01 | 7.91 | 1.75 |
(1) | Metal equivalency based on |
CURI-373 intersected semi-massive to massive sulphide mineralization was intersected from 102.00 to 169.00 metres, grading 3.38% copper, 1.11 g/t gold, 0.41% zinc, 15.8 g/t silver and 0.06% lead (4.35% CuEq). Three higher-grade subsets occur in this intercept, from 103.08 to 108.13 metres, 123.80 to 153.12 metres, and then from 133.39 to 142.50 metres. The first intercept is semi-massive sulphide mineralization grading 6.01% copper, 1.59 g/t gold, 1.53% zinc, 26.1 g/t silver and 0.14% lead (7.70% CuEq). The second intercept is massive sulphide mineralization grading 6.21% copper, 1.70 g/t gold, 0.15% zinc, 22.4 g/t silver and 0.04% lead (7.51% CuEq) and the third intercept is also massive sulphide mineralization grading, 11.65% copper, 2.41 g/t gold, 0.16% zinc, 44.7 g/t silver, and 0.03% lead (13.58% CuEq). A section of mineralized footwall felsic autoclastic volcanic rocks was intersected from 169.00 to 176.40 metres, grading 0.06% copper, 0.27 g/t gold, 0.41% zinc, and 9.2 g/t silver and 0.07% lead (0.45% CuEq).
Drill Hole | From | To | Thickness | Cu | Au | Zn | Ag | Pb | CuEq (1) | Approx. True |
CURI-373 | 102.00 | 169.00 | 67.00 | 3.38 | 1.11 | 0.41 | 15.8 | 0.06 | 4.35 | 50.25 |
including | 103.08 | 108.13 | 5.05 | 6.01 | 1.59 | 1.53 | 26.1 | 0.14 | 7.70 | 3.79 |
including | 123.80 | 153.12 | 29.32 | 6.21 | 1.70 | 0.15 | 22.4 | 0.04 | 7.51 | 21.99 |
including | 133.39 | 142.50 | 9.11 | 11.65 | 2.41 | 0.16 | 44.7 | 0.03 | 13.58 | 6.83 |
169.00 | 176.40 | 7.40 | 0.06 | 0.27 | 0.41 | 9.2 | 0.07 | 0.45 | 5.55 |
(1) | Metal equivalency based on |
Drill hole CURI-374 intersected semi-massive sulphide from 92.54 to 98.10 metres, grading 2.32% copper, 15.37 g/t gold, 21.91% zinc, 403.0 g/t silver, and 3.09% lead (22.58% CuEq). A higher-grade subset was intersected from 92.54 to 96.00 metres, grading 3.38% copper, 24.25 g/t gold, 34.44% zinc, 641.2 g/t silver, and 4.79% lead (35.35% CuEq). A wide section of mineralized footwall felsic autoclastic volcanic rocks was intersected from 98.10 to 120.60 metres, grading 0.13% copper, 0.13 g/t gold, 1.19% zinc, and 4.6 g/t silver and 0.03% lead (0.61% CuEq).
Drill Hole | From | To | Thickness | Cu | Au | Zn | Ag | Pb | CuEq (1) | Approx. True |
CURI-374 | 92.54 | 98.10 | 5.56 | 2.32 | 15.37 | 21.91 | 403.0 | 3.09 | 22.58 | 4.17 |
including | 92.54 | 96.00 | 3.46 | 3.38 | 24.25 | 34.44 | 641.2 | 4.79 | 35.35 | 2.60 |
98.10 | 120.60 | 22.50 | 0.13 | 0.13 | 1.19 | 4.6 | 0.03 | 0.61 | 16.88 |
(1) | Metal equivalency based on |
CURI-381 intersected massive sulphide mineralization from 123.16 to 127.21 metres, grading 3.13% copper, 0.59 g/t gold, 0.33% zinc, 30.6 g/t silver and 0.05% lead (3.88% CuEq). A higher-grade subset occurs from 124.20 to 126.33 metres, grading 4.34% copper, 0.65 g/t gold, 0.05% zinc, 33.5 g/t silver and 0.02% lead (5.06% CuEq).
Drill Hole | From | To | Thickness | Cu | Au | Zn | Ag | Pb | CuEq (1) | Approx. True |
CURI-381 | 123.16 | 127.21 | 4.05 | 3.13 | 0.59 | 0.33 | 30.6 | 0.05 | 3.88 | 2.63 |
including | 124.20 | 126.33 | 2.13 | 4.34 | 0.65 | 0.05 | 33.5 | 0.02 | 5.06 | 1.38 |
(1) | Metal equivalency based on |
All results from the completed infill definition drilling program are to be used in updating the Mineral Resource estimate for
For reference, the last Mineral Resource estimate completed in accordance with NI 43-101 for
Technical Information and QAQC
The Curipamba project work program is being managed and reviewed by Vice President Exploration,
Qualified Person
The technical information of this news release has been reviewed and verified as accurate by Mr.
About Adventus
About Salazar
Neither the
This press release contains "forward -looking information" within the meaning of applicable Canadian securities laws. Any statements that express or involve discussions with respect to predictions, expectations, beliefs, plans, projections, objectives, assumptions or future events or performance (often, but not always, identified by words or phrases such as "believes", "anticipates", "expects", "is expected", "scheduled", "estimates", "pending", "intends", "plans", "forecasts", "targets", or "hopes", or variations of such words and phrases or statements that certain actions, events or results "may", "could", "would", "will", "should" "might", "will be taken", or "occur" and similar expressions) are not statements of historical fact and may be forward-looking statements.
Forward-looking information herein includes, but is not limited to, statements that address activities, events, or developments that Adventus and Salazar expect or anticipate will or may occur in the future. Although Adventus and Salazar have attempted to identify important factors that could cause actual actions, events, or results to differ materially from those described in forward-looking information, there may be other factors that cause actions, events or results not to be as anticipated, estimated, or intended. There can be no assurance that such information will prove to be accurate, and actual results and future events could differ materially from those anticipated in such information. Accordingly, readers should not place undue reliance on forward-looking information. Adventus and Salazar undertake to update any forward-looking information except in accordance with applicable securities laws.
Table 1: Drill Collar Information for Infill Drill Holes at El Domo
Hole ID | EAST | NORTH | ELEV | AZIMUTH | DIP | DEPTH | COMMENT |
CURI-391 | 655001 | 9854898 | 882 | 165 | -65 | 70.6 | Successfully completed per design |
CURI-390 | 695109 | 9855451 | 953 | 170 | -79 | 137.7 | Successfully completed per design |
CURI-389 | 694999 | 9855351 | 908 | 338 | -70 | 64.5 | Successfully completed per design |
CURI-388 | 695051 | 9855474 | 930 | 165 | -50.6 | 143.0 | Successfully completed per design |
CURI-387 | 695051 | 9855474 | 930 | 26 | -49 | 112.3 | Successfully completed per design |
CURI-386 | 695100 | 9855600 | 943 | 230 | -65 | 90.2 | Successfully completed per design |
CURI-385 | 695094 | 9855482 | 940 | 45 | -54 | 128.0 | Successfully completed per design |
CURI-384 | 695054 | 9855642 | 923 | 136 | -54 | 110.6 | Successfully completed per design |
CURI-383(1) | 695373 | 9855400 | 995 | 270 | -65 | 210.4 | Successfully completed per design |
CURI-382 | 695094 | 9855482 | 940 | 64 | -48 | 156.5 | Successfully completed per design |
CURI-381 | 695214 | 9855602 | 949 | 197 | -57 | 154.4 | Successfully completed per design |
CURI-380(1) | 695375 | 9855000 | 1030 | 270 | -70 | 250.1 | Successfully completed per design |
CURI-379 | 695094 | 9855482 | 940 | 167 | -48 | 153.8 | Successfully completed per design |
CURI-378 | 695054 | 9855122 | 893 | 181 | -57 | 113.1 | Successfully completed per design |
CURI-377 | 695054 | 9855122 | 893 | 55 | -51 | 92.3 | Successfully completed per design |
CURI-376(1) | 695361 | 9855100 | 1087 | 270 | -70 | 275.4 | Successfully completed per design |
CURI-375(1) | 695333 | 9855200 | 1057 | 270 | -75 | 250.1 | Successfully completed per design |
CURI-374 | 695006 | 9855134 | 883 | 296 | -45 | 120.6 | Successfully completed per design |
CURI-373 | 695094 | 9855482 | 940 | 103 | -48 | 197.0 | Successfully completed per design |
CURI-372 | 695041 | 9854913 | 888 | 38 | -45 | 106.3 | Successfully completed per design |
CURI-371(1) | 695399 | 9855298 | 1016 | 270 | -65 | 225.7 | Successfully completed per design |
CURI-370 | 695040 | 9854913 | 888 | 231 | -74 | 86.2 | Successfully completed per design |
CURI-369 | 695094 | 9855482 | 940 | 142 | -48 | 168.7 | Successfully completed per design |
CURI-368 | 695041 | 9854913 | 888 | 331 | -58 | 113.6 | Successfully completed per design |
CURI-367 | 695006 | 9855134 | 883 | 196 | -45 | 102.2 | Successfully completed per design |
CURI-366 | 694975 | 9854918 | 872 | 186 | -72 | 74.5 | Successfully completed per design |
CURI-365 | 694934 | 9855242 | 874 | 151 | -72 | 69.5 | Successfully completed per design |
CURI-364-A | 695131 | 9855402 | 946 | 108 | -60 | 121.8 | Successful but lost in fault zone |
CURI-364 | 695134 | 9855402 | 946 | 108 | -60 | 130.4 | Successful but lost in fault zone |
CURI-363 | 694934 | 9855242 | 874 | 180 | -54 | 95.0 | Successfully completed per design |
CURI-362 | 694975 | 9854918 | 872 | 288 | -61 | 88.9 | Successfully completed per design |
CURI-361 | 695134 | 9855402 | 946 | 75 | -54 | 172.8 | Successfully completed per design |
CURI-360 | 694934 | 9855242 | 874 | 25 | -48 | 83.0 | Successfully completed per design |
CURI-359 | 695006 | 9855134 | 883 | 349 | -69 | 86.5 | Successfully completed per design |
CURI-358 | 694934 | 9855082 | 867 | 255 | -54 | 113.0 | Successfully completed per design |
CURI-357 | 695057 | 9855149 | 894 | 229 | -74 | 105.0 | Successfully completed per design |
CURI-356 | 695006 | 9855134 | 883 | 241 | -77 | 110.6 | Successfully completed per design |
CURI-355 | 695057 | 9855149 | 894 | 36 | -45 | 86.3 | Successfully completed per design |
CURI-354 | 695057 | 9855149 | 894 | 55 | -54 | 81.0 | Successfully completed per design |
CURI-353 | 695094 | 9855122 | 908 | 192 | -45 | 97.4 | Successfully completed per design |
CURI-352 | 695057 | 9855149 | 894 | 306 | -77 | 78.0 | Successfully completed per design |
CURI-351 | 695057 | 9855149 | 894 | 338 | -59 | 77.0 | Successfully completed per design |
CURI-350 | 695094 | 9855122 | 908 | 180 | -57 | 85.7 | Successfully completed per design |
CURI-349 | 695094 | 9855122 | 908 | 263 | -51 | 130.2 | Successfully completed per design |
CURI-348 | 695094 | 9855082 | 910 | 276 | -45 | 135.1 | Successfully completed per design |
CURI-347 | 695094 | 9855082 | 910 | 105 | -54 | 91.0 | Successfully completed per design |
CURI-346 | 695094 | 9855082 | 910 | 52 | -69 | 83.4 | Successfully completed per design |
CURI-345 | 695094 | 9855082 | 910 | 142 | -48 | 95.7 | Successfully completed per design |
CURI-344 | 695094 | 9855082 | 910 | 360 | -60 | 84.1 | Successfully completed per design |
CURI-343 | 695094 | 9855082 | 910 | 192 | -45 | 142.0 | Successfully completed per design |
CURI-342 | 695041 | 9854913 | 888 | 346 | -45 | 137.1 | Successfully completed per design |
CURI-341 | 695134 | 9854922 | 917 | 360 | -60 | 117.4 | Successfully completed per design |
CURI-340 | 695134 | 9854922 | 917 | 360 | -45 | 149.0 | Successfully completed per design |
Notes: | |
(1) | Geomechanical drill hole for open pit engineering design purposes only; being drilled in addition to the Infill program |
(2) | All drill holes are surveyed in UTM Datum (Provisional South American 1956, Zone 17) |
SOURCE
© Canada Newswire, source