Tarachi Gold Corp. announced the positive bottle roll cyanide leaching results from three samples of drill core from the company's Jabali concession in Sonora, Mexico. The baseline bottle roll test program carried out on three samples of varying grade demonstrated the test samples are amenable to the cyanide leaching process. The objective of this metallurgical test program was to conduct a baseline investigation to determine the samples' amenability to leaching by cyanidation. The scope of this test program consisted of sample preparation and bottle roll cyanide leaching by the Bureau Veritas Commodities Canada Ltd. BV Minerals Metallurgical Division. Samples T-1910 and T-1911 were taken from drill hole JAB-21-014 while samples T-0348 and T- 0349 were taken from drill hole JAB-20-006 and combined to make up test sample C3. The three leach test samples were chosen to reflect a range of gold grades encountered during the Company's drilling campaigns around the La Dura mine on the Jabali concession. The test samples responded very well to leaching by cyanide. Gold extraction from baseline cyanide leaching at 40 wt.% solids in 1.0 g/L NaCN solution for 48 hours varied from 88.4% in sample C3 to 97.8% in sample C2 and averaged 94.8%. Cyanide (as NaCN) consumption averaged 1.73 kg/t. In general, less than 0.5 kg/t hydrated lime was required to maintain a slurry pH above 10.5 during leaching. Gold leach kinetics as presented in that gold leached rapidly in the first 24 hours, with an average gold recovery of over 90%. In general, maximum leaching results were attained with a residence time of approximately 30 hours. Having observed visible free gold in drill hole JAB-21-014, testing for recovery by gravity is recommended on a representative sample of drill core and cuttings from the Jabali drill programs. Bond ball mill work index is also recommended on selected samples to determine the samples' hardness with respect to breakage in ball mills. Further metallurgical investigation on representative samples is recommended to better optimize process conditions and determine sample variability. Mineralogy analysis with detailed gold mineral search is recommended on leach feed and residues to identify bulk mineralogy, mineral association, and gold carrying minerals as well as gold deportment by gold bearing minerals.