Recycled aggregates: the circular economy supplying the construction sector

20 June 2022 - Sustainability - France

Aggregates, those tiny fragments of rock used in the majority of construction materials, are the second most widely consumed resource in the world after water! The production and use of recycled rather than virgin aggregates address two major challenges: conserving natural resources and recovering construction waste.

What are aggregates?

Natural aggregates are the small fragments of rock also known as gravel, chippings or sand depending on their size. They usually come from solid rock or are extracted from sea and river beds. They go into most construction materials: concrete, mortar, asphalt mix, tarmac, etc. From roads to runways, from houses to industrial buildings, aggregates are everywhere!

16 kilos a day!
On a planetary scale, every person consumes six tonnes of aggregates per year

Recycled aggregates: from a linear to a circular model

The circular economy is based on a simple principle: to produce responsibly by wasting fewer resources and reducing waste generation. Ideally, it means moving from everything being disposable to everything being recoverable. The traditional linear approach to aggregates involves extracting them, transporting them, using them in all kinds of construction - and that's it! The circular model opens up new prospects: recycled aggregates made from construction-sector waste.

Reducing the extraction of virgin aggregates

Using recycled aggregates helps to reduce extraction on land and under water, and to conserve valuable and scarce resources. It also avoids some of the impact on natural habitats and biodiversity, especially since natural aggregate production causes various forms of pollution. This is mainly atmospheric, due to the use of heavy machinery for extraction and above all transporting the aggregates, often by road. But there is also visual pollution, especially where aggregates are obtained from solid rock in quarries.

Recovering construction waste

The construction sector is by far the largest waste producer: 250 million tonnes per year in France alone! Recycled aggregates are a major opportunity to recover these thousands of tonnes of inert waste, which are currently stored away in specialist facilities or in the worst cases, dumped illegally.

250 million
tonnes of waste annually generated by the construction sector in France - three-quarters of the country's total waste

Construction using waste to save the planet

To recycle materials from demolition by making them into aggregates, and to reduce their transportation via local short supply loops, is the double challenge being addressed by by VINCI Construction's Granulat+ initiative..

Granulat+ facilities able to accept, sort and recycle deconstruction waste are making it possible to recycle 100% of concrete and asphalt waste. Each of its 130 certified sites meets a recovery standard and offers a range of services, including logistics, to facilitate the transportation of waste and recycle it as aggregates. These recycled aggregates will become the raw ingredients for new construction materials.

The ecological benefit of recovery is heightened when the waste is sourced from worksites near the recycling plant, reducing the greenhouse gas emissions caused by transport. Prioritising river or rail transport rather than roads to move large quantities can further reduce the environmental impact of producing recycled aggregates. This is one of the options chosen by the Granulat+ plant in Gennevilliers (Seine Saint Denis). Staff at this facility, which boasts its own rail and river junctions, are weighing, sorting, washing and recycling up to 80,000 tonnes of waste from Grand Paris Express worksites.

By promoting local recycling, the 130 certified Granulat+ sites in France recover more than eight million tonnes of aggregates annually - 20% of the market. The aim is to double these volumes by 2030.