Metalsearch Limited announced that the XRF results of the -20um fraction, of 20 additional drill holes at Abercorn have been received. The company completed a 62-hole Air Core drilling program for 2358 metres on the Abercorn Project with depths ranging from 23 to 51 metres, for an average depth of 38 metres. The total number of holes drilled within the project is now 86 for a total of 3,172m. The Abercorn Project has previously produced 99.99% Al2O3 (4N HPA). The company is confident in producing a strong maiden JORC resource as it continues to receive very consistent, high grade intersections of good quality kaolin. Drill hole ABAC 28 was drilled at a satellite target approximately 2km southwest of the main Abercorn Project, and is located 100m north of the historic hole, CK003. Five holes have been drilled in this satellite area in the program and the results have been received for each. The excellent results from holes ABAC 25, 26, 27, 28 & 29 have confirmed that this area will make a significant contribution to the resource extension. These five holes were drilled over an area approximately 300m east-west and 250m north-south. The weighted average of depth and grade of the -20um fraction for these holes is 15m at 30.51% Al2O3. This high quality kaolinite zone is open in all directions. Drill hole ABAC 30 is located in the north western section of the Abercorn Project. The hole was drilled to a total depth of 36m with 19m at 29.6% Al2O3 from 3m to 22m. Drill hole ABAC 32 is located at the northern end of the Abercorn Project. The hole was drilled to a total depth of 30m with 13m at 29.3% Al2O3 from 3m to 16m. Drill hole ABAC 33 is also located at the northern end of the Abercorn Project. The drill hole intersected two zones of good quality kaolinite; 3m from 8 to 11m and 6m from 13 to 19m. These two zones were separated by a 2 metre band of kaolinite containing ~25% silt sized quartz. The kaolinite contained in this 2 metre section appears to be of high quality and if the quartz silt can be commercially removed the entire 11metre section could be mined and processed. Drill hole ABAC 34 is also located at the northern end of the Abercorn Project. The hole was drilled to 42m and intersected two zones of good quality kaolinite; 2m from 7 to 9m and 11m from 13 to 24m. These two zones were separated by a 4 metre band of kaolinite containing ~20% silt sized quartz. The kaolinite contained in this 4 metre section appears to be of high quality and if the quartz silt can be commercially removed the entire 15 metre section could be mined and processed. Drill hole ABAC 35 is located at the northern end of the Abercorn Project. The hole was drilled to a total depth of 39m with 14m at 29.9% Al2O3 from 6m to 20m. Drill hole ABAC 36 is located at the northern end of the Abercorn Project. The hole was drilled to 39m with 2m at 31.4% Al2O3 from 1m to 3m. Drill hole ABAC 37 is located at the northern end of the Abercorn Project. The hole was drilled to a depth of 39m with 8m at 28.1% Al2O3 from 14m to 22m. Drill hole ABAC 38 is located at the northern end of the Abercorn Project. The hole was drilled to a depth of 48m with 13m at 27.7% Al2O3 from 18m to 30m. Drill hole ABAC 39 is located at the northern end of the Abercorn Project. The hole was drilled to a depth of 48m with 6m at 27.3% Al2O3 from 19m to 25m. Drill hole ABAC 40 is located in the northern central section of the Abercorn Project. The hole was drilled to a depth of 45m. Two zones of kaolinite were identified: 5m at 28.5% Al2O3 at 0-5m and 7m at 28.3% Al2O3 at 23-30m. Drill hole ABAC 42 is located in the central section of the Abercorn Project. The hole was drilled to a total depth of 45m with 14m at 28.6% A12O3 from 0m to 14m. Drill hole ABAC 46 is located in the central section of the Abercorn Project. Two zones of good quality kaolinite being 9m at 30.7% Al2O3 from 5 to 14m and 16m at 28.2% Al2O3 from 29 to 45m, the end of the hole were intersected. The hole bottomed in kaolinite assaying 28.2% Al2O3. Drill hole ABAC 47 is located in the central section of the Abercorn Project. It has two ore zones: The upper zone from 1 to 15m contains kaolinite with 30.8% Al2O3 and 7% free quartz sil and the lower zone from 37 to 45m assays 27.4% Al2O3 with approximately 12% silt quartz Drill hole ABAC 48 is located in the central section of the Abercorn Project. ABAC 48 was drilled to a depth of 48m with 23m at 28.7% Al2O3 of good quality kaolinite and 9 to 10% quartz silt in the 0 to 23m section. Drill hole ABAC 65 is located in the central section of the Abercorn Project. With a total depth of 41m the drill hole has a 22m at 30.4% Al2O3 intersection from 0m to 22m.