Alacer Gold : Supporting Information for Copper Hill Press Release

Supporting Drilling Information to Alacer Gold Announcement

This document provides supporting drill collar locations for the Copper Hill drilling program referenced in the announcement "Alacer Gold Reports Initial Drill Results from the Copper Hill Copper Exploration Prospect", dated April 22, 2020.

Drill collar locations are surveyed in UTM Zone 37N, ED50 grid using hand-held GPS in units of meters. All drilling was diamond core drilling with HQ and PQ core sizes. HQ is 63.5mm and PQ is 85 mm in diameter.

Drill Collar Coordinates

	Hole ID			Easting			Northing			Elevation			Azimuth			Dip			End of
													Hole (m)
	EKD-01	483368		4491473		2200		120		-60		474.2
	EKD-02	483198		4491520		2233		120		-60		373
	EKD-03	483196.5		4491521		2233		0		-90		301.3
	EKD-04	483186.4		4491469		2247		120		-60		425
	EKD-05	483225		4491563		2216		120		-60		393.5
	EKD-06	483195		4491518		2229		300		-65		302
	EKD-07	483191		4491407		2263		120		-60		408.2
	EKD-08	483186.4		4491469		2247		0		-90		503.6

Drill Intercepts

Significant intervals reported at a nominal 0.2% copper cut-off and with a maximum 5m contiguous dilution are given in the table below. All thicknesses are down hole length and true widths are not known at this stage.

	Hole ID			From			To (m)			Interval			Cu			Depth			Comments
			(m)					(m)			%			(m)
	EKD-01		168.8		177.8		9		0.37		474.2
	Including	168.8		169.8		1		2.12
	EKD-02		77.70		118.50		40.80		0.87
		144.70		185.50		40.80		2.66
	Including	152.90		169.60		16.70		4.70		373
	174.00		182.20		8.20		2.95
	EKD-02		202.00		218.60		16.60		0.44
		290.40		301.30		10.90		0.50
			33.00		39.00		6.00		0.39
	EKD-03		45.00		55.50		10.50		0.20		301.3
			83.70		154.00		70.30		1.66
	Including	115.30		119.70		4.40		8.25
			13.00		64.00		51.00		0.98
	EKD-04		120.40		127.10		6.70		0.60
		133.40		143.70		10.30		0.77		425
			158.70		204.40		45.70		2.03
	Including	162.80		180.50		17.70		3.99
	EKD-04		255.00		262.80		7.80		0.85

	Hole ID			From			To (m)			Interval			Cu			Depth			Comments
			(m)					(m)			%			(m)
			327.10		341.70		14.60		0.47
			351.50		372.80		21.30		1.98
	Including	362.80		368.60		5.80		6.17
			11.30		41.10		29.80		0.49
	EKD-05		109.50		115.00		5.50		0.99		393.5
			189.50		210.20		20.70		1.33
	Including	191.30		194.00		2.70		5.55
			25.00		35.00		10.00		0.34
			42.00		43.50		1.50		3.30
	EKD-06		88.50		102.50		14.00		0.37		302
			133.50		150.30		16.80		0.90
			157.60		176.60		19.00		1.43
	Including	173.00		175.80		2.80		5.47
	EKD-07														408.2			No Significant
																Interval
	EKD-08		108.00		116.80		8.80		0.38
		170.10		191.00		20.90		1.63		503.6
	Including	181.00		183.00		2.00		7.15
	Including	188.10		189.80		1.70		3.52