Mexican Gold Mining Corp. announce initial assay results from the 2020 drilling program, which targeted expansion and definition drilling at the existing resource at El Dorado. Drilling is ongoing. Mexican Gold has drilled 29 holes for 4,031m, targeting various potential zones of extension of the existing resource at El Dorado, which remains open in several directions. Step-outs of between 90m and 135m carry the El Dorado zone further west over a 450m length. Assays include 10m of 3.93 g/t AuEq in hole LM-20-JB-29 and 19m of 2.15 g/t AuEq in hole LM-20-JB-33. The El Dorado resource has tentatively been opened to the south with holes LM-20-ED-60 at 30.4m of 4.00 g/t AuEq and LM-20-JB-30 at 16m of 3.01 g/t AuEq in hole LM-20-JB-33. The El Dorado resource has tentatively been opened to the south with holes LM-20-ED-60 at 30.4m of 4.00 g/t AuEq and LM-20-JB-30 at 16m of 3.01 g/t AuEq. A 200m gap between the north-east El Dorado zone and the historic mining area of Las Boquillas has been infilled with hole LM-20-LB-02 at 5m of 7.70 g/t AuEq. The existence of an ore shoot at the East Dike Contact has been confirmed with LM-20-ED-57 at 53.9m of 1.58 g/t AuEq. Drilling is ongoing to further extend the El Dorado resource beyond the extensions identified with these drill results. The WDC has significant room for expansion that will be drilled in the 2020 program. Hole LM-20-ED-55 was abandoned short of the target due to technical problems but will be re-drilled. The EDC has so far not been included in resource modelling due to sparse drilling. The 2020 program aims to establish and expand the EDC, with several more holes upcoming. LM-20-ED-57 confirmed indications that a strong ore shoot exists on the east contact, intersecting 53.9m of 1.58 g/t AuEq. LM -20-ED-59 at 4m of 2.98 g/t AuEq was a 50m step-out aimed at the ore shoot but hit above it on an inflection, confirming that the EDC zone has at least 40m height extent. Holes LM-20-ED-56 & 58 encountered irregularities in the contact and drilled into the dike. The south ED zone area has tentatively been open for resource expansion. One further hole has been drilled (assays pending) and several more holes are planned. LM-20-ED-60 at 30.4m of 4.00 g/t AuEq infilled an 80m gap in the layout. LM-20-ED-61 at 9m of 2.64 g/t AuEq filled a 110m embayment in the ED zone. LM-20-JB-30 at 16m of 3.01 g/t AuEq filled a 125m embayment in the ED zone. The entire western side of the ED zone has been open for expansion, subject to overcoming terrain challenges. Drilling detailed in this news release has appended a 450m long strip 90 to 135 m wide to the ED zone. Further drilling has already been completed (assays pending) and further holes are scheduled. LM-20-JB-29 at 10m of 3.93 g/t AuEq is a 135m step-out. LM-20-JB-31 at 12.6m of 1.95 g/t Au Eq is a 100m step-out. LM-20-JB-33 at 19m of 2.15 g/t AuEq is a step-out 120m to the north-west of the limit of the current resource, which potentially brings earlier, outlying drill intersections up to 200m north into the model. LM-20-JB-32 at 4m of 3.04 g/t Au Eq is an infill hole for JB-31. There is a 200m gap in drilling between the historic, high-grade mines at Las Boquillas and the north-east limit of the current resource. This area had not been tested until now due to terrain challenges. There are more holes planned for 2020 which will attempt to infill this 200m X 300m open space. LM-20-LB-01 at 2m of 2.67 g/t AuEq did not fully clear a local dike, which affected the ED zone in this hole. LM-20-LB-02 at 5m of 7.70 g/t AuEq and 2m of 5.58 g/t Au Eq is a 125m step-out north of the current resource. The 3 holes drilled in the Cinco Senores area were follow-ups to a gold discovery made in late 2019 on a blind geophysical target. The form and orientation of the Au-bearing zone was unknown. It appears that the zone may have been intersected in hole LM-20-CS-16. Further drilling is scheduled on this occurrence.