Highlights: 7 mechanical saw-cut channel sampling profiles have been completed at the Semna prospect, for a total length of 331m, along exposed rock faces and drill road cuttings. The channel profiles were sampled at nominal 2m intervals. Significant mineralised intersections from this programme include: 2.80 g/t Au over a 39.3m interval (profile SMC-065), associated with shallow-dipping stockwork veins on the
hole ZEP-005); 4.16 g/t Au over a 6m interval, from a down hole depth of 107m (hole ZEP-020) and 2.60 g/t Au over a 5m interval, from a down hole depth of 74m, and 8.63 g/t Au over a 1m interval, from a down hole depth of 87m (both from hole ZEP-016).
'We are pleased to announce more very positive exploration results from our new Semna discovery today, this time the results from a recent surface channel sampling programme' said Tonno Vahk, CEO. 'The results show broad zones of good grade mineralisation outcropping at surface, and appear to confirm the continuity of the high grade mineralisation identified in the 2023 RC drilling all the way up to surface. Perhaps most importantly the results continue to support the interpretation of a major structural system at Semna with high grade mineralisation hosted in multiple veins and structures, and in various orientations. We have now executed a contract with Geodrill to undertake a second phase of diamond drilling at Semna, as we fast-track the project. We now expect the drilling to be underway next week, with an initial 5,000m of drilling planned. We are also pleased to report the final results from the RC drilling at Zeno last year which returned a number of high grade intersections, from a prospect which is only about 4km away from Semna. Aton firmly believes that the wider area, on which we are planning an aggressive exploration programme, stretching all the way from
Semna Prospect
The Semna prospect is located approximately 27 km east-northeast of the Hamama West deposit and 13 km north-northeast of the Rodruin deposit, and is accessed via desert tracks from either
Semna channel samplingm channel profiles, SMC-065 to SMC-071, were cut and sampled at the Semna prospect, for a total sampled length of 331.1m during late 2023. Profiles were marked up along exposed faces and drill roads where appropriate, in areas of potential surface mineralisation. After the faces and road cuttings had been exposed and cleaned up by an excavator, they were prepared for channel sampling. The channels were created by cutting 2 parallel cuts, approximately 50mm apart with a large generator-powered angle grinder. The channel was subsequently sampled using a hammer and chisel with the sampled material excavated from between the 2 saw cuts, at nominal 2m sample intervals. All channel profiles were mapped and photographed, and the start and end positions of each sample were surveyed using a differential GPS survey system.
Discussion of results
The mineralisation in profile SMC-065 was associated with a stockwork zone consisting of narrow, primarily shallow SE-dipping quartz veins, and included several discrete high grade zones. These high grade zones returned individual sample assays including 19.3, 17.0, 11.95 and 8.59 g/t Au, the last of which was associated with a shallow ancient working approximately 1.5m in width. The mineralisation is interpreted as being associated with a shallow cross-structure, which was not intersected in the RC drilling. This is highly encouraging as it is suggestive of a significant structural system at Semna with a broader array of mineralised veins and zones, rather than just a few discrete mineralised structures such as the Main Vein zone ('MVZ'), which was targeted by the RC drilling.
The mineralised intersection in profile SMC-066 was sampled at the foot of the mountainside on the margin of wadi sediments, and is located approximately 40-50m up-dip of the high grade mineralisation intersected in RC hole SMP-018 (11.98 g/t Au over a 16m interval, see news release dated
The wider zone of mineralisation in profile SMC-069 was associated with a narrow quartz vein located in the footwall of the MVZ, and returned an assay of 41.9 g/t Au from a 1m wide individual sample, again indicating the presence of multiple high grade structures at Semna. Lower grade mineralisation was also intersected at the end of this profile, and is possibly indicative of further blind mineralisation concealed under wadi sediments immediately to the south of this channel profile.
Profiles SMC-067 and SMC-068 tested a massive white quartz vein approximately 2m wide, which is interpreted as being a faulted offset of the MVZ. The lower grades in this zone were consistent with the samples being taken largely from the quartz vein in these profiles, with the gold interpreted as being largely in the altered wall rocks, rather than the quartz vein itself. A single 1.7m wide sample from SMC-067 returned an assay of 5.69 g/t Au from the immediate hangingwall of the quartz vein
Zeno prospect
The Zeno prospect area is located approximately 4 km west of the Semna gold mine and 12 km north of the Rodruin mineral deposit.
Discussion of results
The majority of the holes intersected narrow zones of mineralisation, returning intersections including 9.77 g/t Au over a 3m interval (hole ZEP-005), 4.16 g/t Au over a 6m interval (hole ZEP-020), and 2.60 g/t Au over a 5m interval and 8.63 g/t Au over a 1m interval (both from hole ZEP-018a).
The results from the first pass of drilling are encouraging with many of the holes intersecting depth extensions of the mineralisation identified at surface. There are numerous mineralised veins and structures covering a wide area at Zeno, and intersection of the narrow-high grade vein style mineralisation at depth, notably in hole ZEP-005 (9.77 g/t Au over a 3m interval) is encouraging from a first-pass programme with only a single hole drilled into most of the tested structures. It is noted that many of the veins and structures can be mapped on the ground at Zeno over strike lengths of hundreds of metres, and while the first pass programme has identified good grades of gold in several of the structures, this first-pass drill programme was very preliminary in nature.
Exploration activity update
A contract was signed with
A second batch of lower grade samples from Semna has been submitted for metallic screen fire assay analysis, to assess the relative abundance of coarse gold in the Semna mineralisation. The results of both batches of samples will be released when they become available.
Aton geologists have been undertaking an ongoing mapping and surface sampling programme covering the northern Zeno, Bohlog, and Black Gaharish areas, focusing on areas recently exploited and exposed by artisanal miners, and the Company expects to release the results of this exercise in the coming weeks.
Sampling and analytical procedures
Semna channel sampling
Exposed faces and access road cuttings selected for channel sampling initially had their exposed faces cleaned by an excavator, prior to sampling. A single continuous sample channel was cut along each profile using a large, generator powered angle grinder. Sample intervals were marked up on the cleaned faces with spray paint, with the start and end points of individual samples marked on the exposed faces. The channels were created by sawing 2 parallel cuts, approximately 50mm apart, with the angle grinder. The cut channel was subsequently sampled using a hammer and chisel, with the sampled material excavated from between the 2 cuts. The profiles were sampled at nominal 2m intervals, but with individual sample lengths varying from less than 1m to greater than 3m, as appropriate.
Samples were bagged up in cloth bags, and dried and crushed to -4mm at Aton's onsite Rodruin sample preparation laboratory, and split to a nominal c. 250-500g sample size.
The dried, crushed and split samples were shipped to ALS Minerals sample preparation facility at
Samples were analysed for gold by fire assay with an atomic absorption spectrometry finish (analytical code Au-AA23 and for silver, copper, lead and zinc using an aqua regia digest followed by an AAS finish (analytical code Ag-AA45). Any high grade overlimit gold samples (>10 ppm Au) were re-analysed using analytical code Au-GRA21 (also fire assay, but with a gravimetric finish).
Zeno RC drilling
The RC holes were drilled at 53/4' or 51/2' diameter, and the bulk percussion chip samples were collected directly into pre-written large plastic bags from the cyclone every metre, numbered with the hole number and hole depths, and laid out sequentially at the drill site. Between each metre of drilling the cyclone and top box were cleaned out with compressed air. The bags were logged on the drill sites by Aton geologists. The bulk 1m samples were weighed, and subsequently riffle split through a 3-tier splitter onsite by Aton field staff to produce an approximately 1/8 split, which was collected in cloth bags, numbered and tagged with the hole number and depth. The splitter was cleaned with compressed air between each sample. The reject material from this initial bulk split was re-bagged, labelled and tagged, and retained on the drill sites. A representative sample of each metre was washed, stored in marked plastic chip trays, each containing 20m of samples, photographed, and retained onsite as a permanent record of the drill hole.
The 1m split samples, weighing approximately 5kg each were then transported to the Rodruin sample processing facility, where they were 1/2 riffle split into 2 separate sub-samples, weighing approximately 2.5kg. One of these sub-samples was marked and labelled, and retained at the laboratory for storage. The second 1m sub-samples were then combined into 4m composite samples, weighing approximately 10kg. These were thoroughly mixed and again riffle split to produce a nominal c. 250-500g 4m composite sample which was dispatched to ALS Minerals for analysis. Again the splitter was cleaned with compressed air between each sample. The laboratory composites were allocated new sample numbers. The bulk reject material from the riffle split 4m composite samples was disposed of.
QAQC samples were inserted into the 4m composite sample stream at a rate of approximately 1 certified reference material (or 'standard' sample) every 60 samples, 1 blank sample every 30 samples, and 1 field duplicate split sample every 30 samples.
The 4m composite samples were shipped to ALS Minerals sample preparation laboratory at
The 4m composite samples were analysed for gold by fire assay with an atomic absorption spectroscopy ('AAS') finish (analytical code Au-AA23. Any high grade samples (Au >10 g/t) were re-analysed using analytical code Au-GRA21 (also fire assay, with a gravimetric finish).
Upon receipt of the final assay results from the 4m composite samples from ALS, some of the 1m sub-samples retained at Rodruin were selected by a senior Aton geologist for re-assaying, corresponding to 4m composite assays, deemed to be of significance. These selected 1m split samples were again riffle split to produce a nominal c. 250-500g 1m split sample which was dispatched to ALS Minerals for the same sample preparation at Marsa Alam and analysis at Rosia Montana. The bulk reject material from the 1m sub-sample splits was re-bagged and retained onsite for storage at Rodruin.
The 1m split samples were analysed for gold by fire assay with an atomic absorption spectroscopy ('AAS') finish (analytical code Au-AA23), and for silver, copper, lead and zinc using an aqua regia digest followed by an AAS finish (analytical code Ag-AA45). Any high grade gold samples (Au >10 g/t) were re-analysed using analytical code Au-GRA21 (also fire assay, with a gravimetric finish).
About
Contact:
TONNO VAHK
Chief Executive Officer
Tel: +1 604 318 0390
Email: info@atonresources.com
(C) 2024 Electronic News Publishing, source