Silver Dollar Resources Inc. reported the initial assay results from the Phase II drilling ongoing at the underexplored Noria portion of the La Joya Silver Project (the "Property") located in the state of Durango, Mexico. Key Highlight: Hole NOR-22-013 returned the higher grades to date at the new Brazo Discovery, intersecting 815 grams per tonne (g/t) silver equivalent (AgEQ) over 5 metres (m) within a broader interval of 363 g/t AgEQ over 19.35 m starting at 86.4 m downhole. Hole NOR-22-012 was a 30 m step back targeting the gold zone identified in NOR-22-009 (0.66 g/t gold (Au) over 58.84 m from 75.83 m downhole).

Mineralization encountered included an intercept with 1.00 g/t Au over 26.85 m from 131.78 m downhole. While the interval in NOR-22- 012 is approximately half the width of the interval in NOR-22-009 it is 42% higher in grade. Hole NOR-22-013 was a -20° steeper inclined hole beneath the silver-zinc (Ag-Zn) zone identified in NOR-22-008 (89.59 g/t AgEQ over 125.3 m from surface including 267.56 g/t AgEq over 10.47 m from 70.53 m downhole), with NOR-22-013 targeting the higher-grade mineralization 35 m further down dip.

The high-grade polymetallic mineralization of note begins with 363.29 g/t AgEQ over 19.35 m from 86.4 m downhole. The diamond drill core (HQ size) was geologically logged, photographed, and marked for sampling. Core designated for sampling was sawn in half with a diamond blade core saw.

One-half of the core was sealed in plastic bags and shipped for analysis. The remaining half portion was returned to the core trays for storage and/or for metallurgical test work. The sealed and tagged sample bags were transported to the ActLabs facility in Zacatecas, Mexico where the samples were crushed and 200­300-gram pulp samples prepared with 90% passing Tyler 150 mesh (106m).

The pulps were assayed for gold using a 30-gram charge by fire assay (Code 1A2 and/or FA450) and over limits greater than 10 grams per tonne were re-assayed using a gravimetric finish (Code 1A3 and/or FA550). Silver and multi-element analysis was completed using total digestion (Code 1F2 Total Digestion ICP). Over limits greater than 100 grams per tonne silver were re-assayed using a gravimetric finish (Code 8-Ag FA-GRAV Ag).

Quality assurance and quality control ("QA/QC") procedures monitor the chain of custody of the samples and include the systematic insertion and monitoring of appropriate reference materials (certified standards, blanks, and duplicates) into the sample strings. The results of the assaying of the QA/QC material included in each batch were tracked to ensure the integrity of the assay data. All results stated in this announcement have passed Silver Dollar's QA/QC protocols.