Tarachi Gold Corp. announce its geology team has reported the presence of visible gold in drill cuttings from the recently completed surface reverse circulation ("RC") drill program south of the historic La Dura mine on the Company's Jabali concession. This is the first time that the Company has seen visible gold either in or around the La Dura mine. The visible gold was observed in the drill cuttings from RC hole JAB-21-014 over an approximate interval of ten metres from 18 to 28m downhole. The drill hole was collared about 45m southeast of the historic underground workings at La Dura with an azimuth of 15o and a dip of 60o. Company geologists discovered the visible gold by panning some of the extra drill cuttings from this interval. Assays are still pending from the RC drill holes, results are expected to be received from the lab over the coming weeks. Based on the drilling and mapping done to date, the Tarachi geology team believes the gold is hosted in a 10-20m thick panel of heavily silicified rhyodacite striking roughly north-south, dipping to the east at an approximate angle of 30o and plunging to the south at 25o. Higher grade gold mineralization is suspected to be concentrated within this panel in vertical zones or shoots running east-west. The RC surface drilling program is expected to provide greater clarity as to the true thickness of the panel as well as if there are additional parallel structures at depth. Core samples were selected by a geologist and sawed in half. One half of the core remains in the core tray the other half is placed into a plastic bag. Sample tags were submitted into each bag before being sealed and stored at the campsite in a secure area and were later transported by company truck directly the Bureau Veritas Mineral Laboratories (BVM) in Hermosillo, Sonora, Mexico. At the laboratory, the samples were dried, crushed and pulverized with the pulps being sent airfreight for analysis to BVM in Vancouver, B.C. for 37-element ICP analysis after modified aqua regia digestion. Gold assays are done in Hermosillo by 50-gram fire assay with an atomic absorption spectroscopy finish. Samples were checked using a 50-gram fire assay with a gravimetric finish for samples greater than 10ppm Au and 1Kg metallic fire assay with duplicate minus fraction analyzed. Both Hermosillo and Vancouver BVM facilities are ISO 9001 and ISO/IEC 17025 accredited. Laboratory control samples comprising certified reference samples, duplicates and blank samples were inserted by the laboratory into the sample stream and analyzed as part of the quality assurance/quality control protocol.