Aker Solutions ASA has been awarded a sizeable1 contract by Equinor to deliver engineering, procurement and construction (EPC) of a subsea compression module to be installed subsea at the Åsgard gas field, offshore Norway. The scope covers EPC of the fifth subsea compression module to be delivered by Aker Solutions for the Åsgard subsea gas compression system. The new module will be a copy of the previously awarded fourth module, and will partly be built reusing existing equipment. It will be installed at the actively producing field with limited need to interrupt production. Engineering will be carried out mainly at Aker Solutions’ offices in Fornebu, Norway, and the fabrication work will be done at Aker Solutions’ yard in Egersund, Norway. The work starts immediately, and the module is planned to be ready for delivery in August 2024. The Åsgard subsea gas compression system was delivered by Aker Solutions and installed in 2015. The two-train compression system has been running successfully for more than six years with an impressive uptime of close to 100 percent. Aker Solutions has since the concept phase been working closely with Equinor to prepare for extended operations at the field. As part of this work, the existing compression modules are in cooperation with Equinor and MAN Energy Solutions being refurbished and upgraded to accommodate a higher compression ratio for the system. The purpose is to enhance production and extend the field’s lifetime as the pressure in the reservoir naturally declines. The system is also designed for continuous liquid injection in the compression module, making it a wet gas compression solution.