Gungnir Resources Inc. reported 2023 drill results from the Company's Lappvattnet high-grade nickel deposit in northern Sweden. Drilling continued to define and expand the limits of both the Main Zone and recently discovered Footwall Zone. The 2023 program at Lappvattnet consisted of eight holes drilled on three profiles (Sections 13E, 16E and 19E) totaling 1,910 metres; please refer to accompanying long section and results table below.

Gungnir has now drilled 53 holes for 7,345 metres in three rounds at Lappvattnet from 2021 to 2023. The Main Zone was cut in five holes with the deepest intercept in drill hole LAP23-08 located on section 19E approximately 100 metres below the current nickel resource with mineralization hosted in a thicker peridotite unit similar to the western part of the deposit. Drill hole LAP23-01 further refined the central high-grade core of the Main Zone (> 5% Ni assays; pink on attached long section) which appears to plunge very shallowly to the east.

Holes LAP23-02, -03 and -07 further defined continuity within the Main Zone. Three holes, LAP23-04, -05 and -06 contributed to defining the upper and lower limits, and plunge of the Main Zone. The Main Zone, on the sections drilled, dips steeply to the south at -70 to -80o and has a total strike length potential of approximately 1.5 km to the eastern property boundary.

The east half of the property is sparsely drilled with most historic holes over-shooting the new refined target, and some holes drilled too deep and/or too short. The sub-parallel Footwall Zone is located about 25 to 75 metres in the structural footwall, or north of the Main Zone starting at Section 13E (apparent western limit). It was encountered in three holes drilled.

Footwall intercepts include 16.9 metres of 0.56% Ni (drill hole LAP23-02) and highly anomalous Ni mineralization in holes LAP23-05 and LAP23-08 (with individual assays up to 0.62% Ni) up to 175 metres below the current resource block. Nickel in all three holes is hosted within sulphide mineralized peridotite units and its margins. The Footwall Zone is open at depth and possibly down-plunge, sharing a similar structural trend with the Main Zone.

In addition to incorporating 2023 drill data into the Company's 3D model, next steps will also include field/data reviews in the eastern part of property ahead of the next phase of work. The Company plans to submit an expanded, multi-year drill permit extension which will include potential plans for geophysical surveys. The Company also plans to evaluate metallurgical testing options.

At the same time as the Lappvattnet field checks, scheduled for October, management will view drill core from four, short scout holes that the Company drilled at its Hemberget property. Preliminary drill collar co-ordinates in Swedish system RT90-2.5 (Easting/Northing), drill section, azimuth and dip in degrees, and hole length in metres (final surveys pending): ·     LAP23-01: 1741710mE/7165216mN; 13E; azimuth: 335o; dip: -55o; length: 150m ·     LAP23-02: 1741710mE/7165216mN; 13E; azimuth: 335o; dip: -78o; length: 210m ·     LAP23-03: 1741839mE/7165215mN; 16E; azimuth: 335o; dip: -52o; length: 199m ·     LAP23-04: 1741840mE/7165214mN; 16E; azimuth: 335o; dip: -70o; length: 252m ·     LAP23-05: 1741840mE/7165214mN; 16E; azimuth: 335o; dip: -80o; length: 303m ·     LAP23-06: 1741950mE/7166265mN; 19E; azimuth: 335o; dip: -45o; length: 198m ·     LAP23-07: 1741950mE/7166265mN; 19E; azimuth: 335o; dip: -60o; length: 250m ·     LAP23-08: 1741968mE/7166225mN; 19E; azimuth: 335o; dip: -65o; length: 348m Core was logged and tagged for sampling at the Company's logging facility in Lycksele, Sweden, then shipped to ALS Minerals' Core Services Laboratory in Mala, Sweden. Core was sawed on site in Mala by ALS staff and prepped sample material was sent to ALS's Lab in Ireland.

Core was analyzed for multi-elements using code ME-MS41, CuOG46 analysis for >10000 ppm Cu, NiOG46 analysis for >10000 ppm Ni, and Pt, Pd, and Au were analyzed using fire assay method PGM-ICP27. Blanks, certified standards and duplicates are routinely included in sample batches for quality assurance and control. Gungnir's nickel resources in Sweden currently total 177 million pounds (80.5 million kg) of nickel: ·     Lappvattnet: Inferred Resource of 780,000 tonnes grading 1.35% nickel for 23.1 million lbs (10.5 million kg) of nickel.

     Rormyrberget: Inferred Resource of 36,800,000 tonnes grading 0.19% nickel for 154 million lbs (70 million kg) of nickel.