OSAI Automation System S p A : 22/03/2024- Osai A.S. S.p.A. SB Investor Presentation

Company Presentation FY23

Osai A.S. S.p.A. SB

Parella (TO), 22 March 2024

Agenda

Disclaimer	pag. 3
Company Overview	pag. 5
Overview FY23	pag.	19
Osai Next Products	pag.	32

Disclaimer

You must read the following before continuing

Disclaimer

This presentation (the "presentation") has been prepared by Osai A.S. S.P.A. SB (The "company") for information purposes only, and contains only summary information. Furthermore, it has been drafted without claiming to be exhaustive. The information set out in the presentation (the "information") has been supplied and elaborated by the company. This presentation may contain financial and/or business information and/or operating data and/or market information regarding business and assets of the company and of its subsidiaries (together with the company, the "group"). Certain financial information set out herein may not have been audited, reviewed, discussed or verified by any independent

accounting firm. Therefore, the recipient undertakes vis-à-vis the company.

This presentation does not constitute an offer to the public or an invitation to subscribe for, purchase or otherwise acquire any financial products, as defined under article 1, paragraph 1, letter (t) of legislative decree no. 58 of 24 february

1998, as amended. Therefore, this document is not an advertisement or a recommendation and in no way constitutes a proposal to execute a contract, an offer or invitation to purchase, subscribe or sell any securities and neither it nor any part of it shall form the basis of or be relied upon in connection with any contract or commitment or investments decision whatsoever. The company has not prepared and will not prepare any prospectus in accordance with article 94 of the legislative decree no. 58 of 24 february 1998, as amended. Any decision to purchase, subscribe or sell securities will have to be made independently of this presentation. Therefore, nothing in this presentation shall create any

binding obligation or liability on the company and any of their advisors or representatives.

The information and opinions contained in this document are provided as at the date hereof and are subject to change without prior notice. The recipient will be solely responsible for conducting its own assessment of the information set

out in the presentation. Neither the company, nor any of their advisors or representatives shall be obliged to furnish, to provide or to update any information or to notify or to correct any inaccuracies in any information. Neither the company, nor any of their advisors or representatives shall have any liability to the recipient or to any of its representatives as a result of the use of or reliance upon the information contained in this presentation.

No representation and no liability. No reliance may be placed for any purposes whatsoever on the information or on its completeness. No representation or warranty, express or implied, is or will be given by the company, its

shareholders, directors, officers, advisers, agents, employees or affiliates or any other person as to the accuracy, completeness, suitability or fairness of any information provided and, so far as is permitted by law and except in the case of fraud by the party concerned, no responsibility or liability whatsoever is accepted for the accuracy or sufficiency thereof or for errors, omissions or misstatements, negligent or otherwise, relating thereto. In particular, but without

limitation, no representation or warranty, express or implied, is or will be given as to the achievement or reasonableness of, and no reliance may be placed for any purpose on the accuracy or completeness of, any estimates, targets, projections or forecasts and nothing in these materials should be relied upon as a promise or representation as to the future. No liability for any direct, indirect or consequential loss or damage suffered by any person as a result of relying on all or any part of this document is accepted. The company, the group or any shareholders, directors, officers, advisers, agents, employees or affiliates or any other person disclaim all and any responsibility and liability whatsoever,

whether arising in tort, contract or otherwise, for any errors, omissions or inaccuracies in such information or opinions or for any loss, cost or damage suffered or incurred howsoever arising, directly or indirectly, from any use of this presentation or its contents or otherwise in connection with this presentation and the information therein. Persons reading this presentation shall make all trading and investment activity in reliance on their own assessment and/or

decisions.

No advice. This presentation is not intended to provide, and should not be relied upon for, financial, business, accounting, legal or tax advice and you are strongly advised to consult your own independent advisers on any financial, business, legal, tax or accounting issues relating to the information and/or materials provided hereunder.

No recommendation. The sole purpose of this presentation is to provide the information. This presentation contains only summary information and does not purport to and is not intended to contain all of the information that may be required to evaluate, and should not be relied upon in connection with, any potential transaction. In addition, this presentation and the information are not intended to, constitute any sort of recommendation, invitation or solicitation

regarding any investment in the company. It is not intended to be (and should not be used as) the sole basis of any credit analysis or other evaluation, and it should not be considered as, a recommendation by any person for you to participate in any potential transaction.

Certain information contained in this document has been obtained from published and non-published sources prepared by other parties, which in certain cases have not been updated to the date hereof. While such information is

believed to be reliable for the purpose used in this document, the company or the group do not assume any responsibility for the accuracy or completeness of such information and such information has not been independently verified by the company or the group.

By accepting this presentation you acknowledge and agree to be bound by the foregoing terms, conditions, limitations and restrictions. Any failure to comply with these terms, conditions, limitations and restrictions may constitute a violation of applicable laws and regulations.

pag. 4

Company Overview

Board of Directors

MIRELLA FERRERO

FABIO BENETTI

CARLO FRIGATO

MARCO GUOLO

SERGIO DUCA

DONATELLA BUSSO

PAOLA MARINI

EXECUTIVE CHAIR

CEO

EXECUTIVE BOARD MEMBER CTO - EXECUTIVE BOARD MEMBER IND. BOARD MEMBER

IND. BOARD MEMBER

IND. BOARD MEMBER

1992 - date: Osai A.S. S.p.A. SB Co-Founder, Company Representative and Chair of the Board of Directors

2005 - 2020: Banca Generali

1980 - 2005: Previous experience in Unicredit Banca, Banca Fideuram

40+ years of experience in the Banking sector

2016 - date: Osai A.S. S.p.A. SB HR Director, General Manager

2008 - 2015: RSGS, RSPP, General Services Manager

with ICT mandate

2007: Osai A.S. - Business Organisation Manager

Master's Degree in

Engineering Management -

Univ. of Torino

Apr2023 - date: Osai A.S. S.p.A. SB Executive Board Member

2020 - 2023: Osai A.S.'s temporary

CFO

2018 - 2020: Giglio Group S.p.A. - CFO

2014 - 2018: Docomo Digital Ltd - CFO & Board Member

2000 - 2014: Buongiorno S.p.A. - CFO

1999 - 2000: E&Y

1996 - 1999: EDS S.p.A. - Account

Manager

1989 - 1996: Accenture S.p.A. - Senior

Manager

Master's Degree in Electronic Engineering

Apr2023 - date: Osai A.S. S.p.A. SB Executive Board Member

2011 - date: CTO (Chief Technology Officer) - Technical & Sales Manager Semiconductor & Laser Technologies

Division

2001 - 2011: Osai A.S. Laser Division Manager

1999 - 2000: Osai A.S. Software Analyst

1992 - 1998: RTM - design and production of laser machines

28+ years of experience

Chartered Accountant, Auditor and Audit & Risk Management Committee member

Professor of Financial Accounting	Affiliate Professor of Raw Material
(University of Torino - ESCP Business	Engineering (Politecnico Torino)
School), Chartered Accountant and
Statutory Auditor

pag. 6

Key Manager

MARCO GADALETA

STEFANO GIORZA

MARCO CARNIATO

SIMONE FERRARO

CFO

2023 - date: Osai A.S. S.p.A. SB - CFO - Chief Financial Officer

2016 - 2023: Silvateam Group - Group CFO

2000 - 2016: Gavio Group -

Administration, Finance, HR Director

1998 - 2000: TNT France - Financial Controller

1992 - 1998: Deloitte & Touche - Auditor

COO

2020 - date: Osai A.S. S.p.A. SB - COO - Chief Operations Officer

2010 - 2020: Osai A.S. CPO - Technical Director

2005 - 2010: Osai A.S. R&D Manager

2005 - 2015: Osai A.S. Mechanical Purchasing Manager, Head of General Planning

1999 - 2010: Osai A.S.

Mechanical Design Manager

1999 - 2005: Osai A.S. Project Manager / Technical leader

1992 - 2004: Osai A.S.

Mechanical Designer

CCO

2023 - date: Osai A.S. S.p.A. SB

• CCO - Chief Commercial Officer

2021 - 2023: Arol S.p.A. - Key

Account Manager

2016 - 2021: Gefit S.p.A. -

Global Sales Manager

2014 - 2015: Gefit S.p.A. - Asia

Pacific Sales Director

2010 - 2013: Gefit S.p.A. -

Business Development

Manager

2008 - 2010: Gefit S.p.A. -

Sales&Marketing Technical

Engineering

2006 - 2008: Ansaldo Energia

S.p.A. - Plant&Start Up

Engineering

SALES MANAGER

2018 - date: Osai A.S. S.p.A. SB Technical & Sales Manager Electronic, Automation & Robotics Solutions

2016 - 2017: Osai A.S. Key Account Manager and Sales Support

2008 - 2015: Osai A.S. Key Account Manager

2002 - 2008: Osai A.S. Manager of laser applications

pag. 7

pag. 8

Osai GreenTech, a new story

1991	2015	2019	2022	2024
Osai A.S., company	Participation in	The RE4M project is	Osai Green Tech SB	After obtaining
operating in	the ADIR project	born , an innovative	S.r.l. is established	permits for the
sector	for the recovery	system for the	with the aim of	installation of RE4M,
of industrial	of precious	extraction and sorting	actively contributing	in February Iren
automation,	metals in	of electronic	to the spread of	announced the plant
was founded by	collaboration	components for the	automation in the	for the treatment of
Carlo Ferrero.	with Fraunhofer	recovery of critical and	recycling world,	WEEE, which was
	Institute.	precious metals.	bringing efficiency,	launched both at the
			speed and	headquarters of the
			sustainability.	Tuscany region, in
				Florence, and in
				Terranuova Bracciolini,
				Valdarno.
				pag. 9

						A Success Story
			Oct 2015		2020	2022
			Upon the
	1994		2018	Continuity and	In October, Osai
		untimely death of
		development of	established, Osai
1991	Introduction of		the founder, his	First burn-in
	activity	Green Tech SB
Osai founded	Laser technology		sister Mirella	system
	maintained,	S.r.l., its first
by Carlo	and subsequent	2011	takes over the	delivered
despite the	Società Benefit
Ferrero, in the	collaboration	Delivery of the first	company, relying	Osai enters the
pandemic	and construction
industrial	with a world	machine for the	on the
Borsa Italiana	shock	work started on
automation	leader in the	semiconductor	commitment and
Elite		the new Samone
sector	field of laser	sector	motivation of	Listing on EGM
programme	plant.
	sources		management	Italia

1992	2001	2015	Dec 2016	2019	2021	2023
Acquisition of the	Creation of the	Start of the ADIR	The company	OPEN INNOVATIVE	Osai takes part to	RE4M is nearing
first order for a	Neo platform and	project for the	lists its first	PMI 2019 award,	the "Ecomondo"	completion. Osai
copier roller	realisation of	recovery of	Minibond on	conferred by Grant	fair, a major	GreenTech
assembly machine	standard machine	precious metals -	the Borsa	Thornton in	event in Europe	family's
	projects for the	circular	Italiana	collaboration with	for	expanding its
	electronics sector	economy, in	ExtraMot PRO	CNEL	Ecological	products in
		collaboration			transition and	battery, HD and
		with the			new model of	photovoltaic
		Fraunhofer			circular and	market sector.
		Institute			regenerative
					Economy
						pag. 10