Log in
Forgot password ?
Become a member for free
Sign up
Sign up
New member
Sign up for FREE
New customer
Discover our services
Dynamic quotes 

MarketScreener Homepage  >  Equities  >  Australian Stock Exchange  >  Thor Mining PLC    THR   AU000000THR2


End-of-day quote. End-of-day quote Australian Stock Exchange - 10/26
0.025 AUD   +19.05%
10/24THOR MINING : Ragged Range Project - Visible gold in follow up sampling
10/24THOR MINING : Results of General Meeting
10/24THOR MINING : Notification of Major Interest in Shares
SummaryMost relevantAll NewsPress ReleasesOfficial PublicationsSector news

Thor Mining : Substantial Initial Copper Resource - Moonta Project

share with twitter share with LinkedIn share with facebook
08/15/2019 | 01:23am EDT

ASX Code: "THR"

15 August 2019


Registered Numbers:

United Kingdom 05276 414

Australia 121 117 673

Registered Office:

58 Galway Avenue



Ph: +61 8 7324 1935

Fx: +61 8 8351 5169





Twitter @ThorMining


Mick Billing Executive Chairman Thor Mining PLC +61 8 7324 1935

Nominated Advisor Colin Aaronson Grant Thornton

+44 (0) 20 7383 5100

AIM & ASX Listings:

Shares: THR


Michael Billing

David Thomas

Paul Johnson

Alastair Middleton

Richard Bradey

Key Projects:

  • Tungsten Molyhil NT
    Pilot Mountain USA
  • Copper
    Kapunda & Moonta SA

Company Announcements Office

ASX Securities Limited,

20, Bridge Street,

Sydney, N.S.W. 2000



The Board of Thor Mining Plc ("Thor" or the "Company") (AIM, ASX: THR), is pleased to announce an initial Mineral Resource Estimate (MRE) containing 114,000 tonnes of copper, considered amenable to In Situ Recovery techniques ("In Situ Recovery" or "ISR"), released 15 August 2019 by EnviroCopper Ltd. ("ECL").

Thor, as announced on 6 March 2019, is acquiring up to a 30% interest in EnviroCopper, which in turn is earning from Andromeda Metals Limited (ASX: ADN) up to a 75% interest in the mineral rights and claims over the northern portion of the Moonta exploration licence area (EL5984) in South Australia.

EnviroCopper Ltd are also earning, from Terramin Australia Limited (ASX:TZN), up to a 75% interest in the mineral rights and claims over the portion of the historic Kapunda copper mine in South Australia recoverable by way of in situ recovery techniques

Subject to full earn in Thor would therefore hold an effective 22.5% interest in each of the Moonta and Kapunda copper projects.


  • An Inferred Resource estimate of 66.1 million tonnes (MT) grading 0.17% copper (Cu), containing 114,000 tonnes of contained copper, at a cutoff grade of 0.05%Cu;
  • At a higher cutoff grade of 0.1% Cu the resource stands at 35.4 MT grading 0.26% copper (Cu), containing 93,000 tonnes of contained copper,
  • The EnviroCopper managed resource inventory when included with the Mineral Resource Estimate for the Kapunda Copper Project, now stands at 233,000 tonnes of copper;
  • The resource estimate is considered preliminary, with an additional 308 drill holes over Wombat, Bruce, and Larwood deposits to be included in the resource modelling once scheduled quality assurance processes are complete.
  • ISR processes are not burdened by the normally high capital and operating cost activities of mining, crushing, grinding, and often flotation associated with conventional mining and processing operations. Subject to testwork and feasibility study outcomes at Moonta, there is therefore an expectation that copper production from deposits amenable to ISR techniques may be at relatively low cost.

Page | 1

ASX Code: "THR"

15 August 2019

  • Further work is required to advance a range of areas prior to commercial development including ongoing local government and community engagement, continuing technical assessment, and various environmental and regulatory issues.

Mick Billing, Executive Chairman, commented:

"An Inferred Resource estimate containing 114,000 tonnes of copper is outstanding news for our investors, and we look forward to further upgrades to this estimate as additional historical drillholes are validated".

This builds upon the EnviroCopper Kapunda resource of 119,000 tonnes contained Cu, (refer AIM announcement of 10 February 2016 and ASX announcement of 12 February 2018), with copper emerging as a very significant component of the Thor Mining project portfolio.

"Global copper pricing outlook, despite some recent falls, remains firm. At the date of this announcement of approximately US$5,700 per tonne, this Inferred Resource demonstrates that the project has considerable potential value."

"Thor holds a 25% interest in EnviroCopper, with rights to increase that equity to 30%, and is therefore very well placed with its interest in this strategically significant project, at a time when new copper opportunities in safe jurisdictions are at a premium."

"The advancements in ISR and lixiviant technologies offer new methods to extract copper. The ISR method is considered to be a viable method of extracting the copper in this location with minimal disturbance to the existing surface profile."

Thor and EnviroCopper are committed to ongoing community engagement being fundamental in the development of the Moonta project, and we will engage widely through review and feedback of our plans and processes as we advance this important opportunity".

"We look forward to updating investors regularly as news on this project becomes available."

On 5 March 2019, Thor announced it had signed a Memorandum of Understanding (MOU) for the vending of its interest in the Kapunda Copper Project into a new copper focused Company, EnviroCopper Limited ("EnviroCopper"), to include an interest in the Moonta project, subject to due diligence processes, and execution of a binding Farm-In and Joint Venture Agreement. The due diligence portion of that work is complete, and the parties are proceeding with documentation of the binding Farm-In and Joint Venture Agreement.

Page | 2

ASX Code: "THR"

15 August 2019

Figure 1. Moonta & Kapunda Location Map

Figure 2. Schematic of Insitu Recovery process

Resource Estimate

Following a review of both historical mining records, historical drilling reports and drill core an update of the geological model has been prepared upon which mining consultants, Mining Plus, have prepared for EnviroCopper an Inferred Resource Estimate for the Moonta Copper Deposit assessed as being potentially amenable to Insitu Recovery.

Table A: Moonta Copper Mineral Resource Estimate

JORC 2012






Cu (%)

Cu (metal




(Cu %)































  • Figures are rounded to reflect appropriate levels of confidence. Apparent differences may occur due to rounding.
  • EnviroCopper are earning a 75% interest in this resource, and Thor have investment rights for up to 30% of EnviroCopper.
  • Cut-offgrade used of 0.05% Cu

Exploration Target

An ISR amenable Exploration Target for the Moonta Project was published on 6 March 2019 (https://www.asx.com.au/asxpdf/20190306/pdf/4437wcrytk0qmr.pdf) of between 238 Mt and 310 Mt at a grade range of 0.18% to 0.23% Copper (between 428,000 and 713,000 tonnes of contained copper).

Page | 3

ASX Code: "THR"

15 August 2019

The Mineral Resource Estimate sits within, and forms part of, that Exploration Target. Exploration Targets are conceptual in nature and there has been insufficient exploration to define a Mineral Resource under the JORC Code and it is uncertain if further exploration will result in the determination of a Mineral Resource.

Further Information

The Wombat, Bruce and Larwood deposits fall on freehold land used for cereal cropping. Native Title is extinguished on freehold land.

Figure 3 - Tenement map of the Moonta Project area

Figure 4 - Wombat section showing

weathering trough

Copper minerals observed in the weathering troughs include those typically seen in the weathered profile of copper sulphide deposits, including chalcocite (Cu2S), native copper, rare copper carbonates, and a black oxide phase tentatively identified as tenorite (CuO). Chalcopyrite is present but rare.

All three deposits remain open along strike or at depth, presenting opportunities to find further mineralisation in the trough extensions. The hydrological characteristics of the troughs are positive, with the mineralised material identified as being porous and likely permeable. The troughs are bounded laterally by fresh and impermeable bedrock that form natural aquacludes.

Preliminary metallurgical testwork confirms that copper is present in phases amenable to leaching, with improved recoveries anticipated with leachant optimisation. Non-copper bearing minerals that might consume ISR leachant, such as carbonates, have not been observed in the weathering trough hosted mineralisation.

Page | 4

ASX Code: "THR"

15 August 2019

The supplied drilling database consists of 164 drillholes for 18,485 m of drilling. Drill methods undertaken at Moonta include, Diamond Drilling (DD), Reverse Circulation (RC), Air Core (AC), Rotary Air Blast (RAB) and also Auger drilling. ECR has also supplied survey, assay and logged geology data for the project area.

As the ISR process is more effective in heavily oxidised rocks, EnviroCopper have supplied a 3-D surface representative of the deeply weathered trough that hosts the deposits. Mining Plus have reviewed these wireframes to verify that they are suitable for Mineral Resource Estimation (MRE) work. The copper mineralisation above and below these weathered surfaces has then been modelled to ensure that they represent unique and consistent mineralised domains.

The drillhole assays have been composited to 3 m lengths, with the composites inside the mineralisation domains analysed to ensure that they represent a single grade population, with no need for additional sub-domaining. The presence of extreme values inside each of the mineralised domains has been assessed using a combination of statistical measures and cumulative log probability and log histogram plots. Where extreme values have been identified, top-cuts have been applied to reduce their influence during the geostatistical analysis and grade estimation. Variographic analysis has been undertaken on the top-cut composite data within each mineralised domain.

Quantitative Kriging Neighbourhood Analysis (QKNA) has been undertaken on the main mineralised domains at both Bruce and Wombat to determine the optimal block size and interpolation parameters for the deposits. The optimal parameters derived from data at Bruce have been used for the Larwood deposit.

Separate block models have been created for the Bruce, Larwood and Wombat deposits. Bruce and Larwood have utilised a parent block size of 60 m (X) by 20 m (Y) by 10 m and sub-blocks to 6 m (X) by 2 m (Y) by 1 m (Z). The Wombat block model has a parent block size of 50 m (X) by 20 m (Y) by 10 m and sub-blocks to 2.5 m (X) by 2.5 m (Y) by 1.0 m (Z). The sub-blocks have been estimated at the parent block scale. The block size selected is considered appropriate for the drillhole spacing defining the majority of the mineralisation within all three deposits.

Copper grades at Bruce and Wombat have been estimated using Ordinary Kriging inside the mineralised domains and surrounding waste using three interpolation passes, with the domains used as hard boundaries during the estimation. The search parameters and ranges have been defined from the modelled variography and QKNA. The small number of samples within Larwood has resulted in an inability to generate meaningful variograms. Therefore, an Inverse Distance weighted to the power of two interpolation method has been utilised for copper and gold. Grades have been estimated for Bruce and Wombat with:

  • Pass 1 search ellipse set at one third the variogram range with a minimum of four and a maximum of 12 samples required to fill each block,
  • Pass 2 search ellipse set at two thirds the variogram range with the same minimum and maximum samples as Pass 1,

Page | 5

This is an excerpt of the original content. To continue reading it, access the original document here.


Thor Mining plc published this content on 15 August 2019 and is solely responsible for the information contained therein. Distributed by Public, unedited and unaltered, on 15 August 2019 04:21:03 UTC

share with twitter share with LinkedIn share with facebook
All news about THOR MINING PLC
10/24THOR MINING : Ragged Range Project - Visible gold in follow up sampling
10/24THOR MINING : Results of General Meeting
10/24THOR MINING : Notification of Major Interest in Shares
10/24THOR MINING : Ragged Range Gold Project Sampling Program
10/24THOR MINING : Chess Depositary Interest
10/24THOR MINING : Ragged Range Gold - Historic Sampling Assays support Thor Sampling
10/24THOR MINING : Ragged Range Gold - Airborne Magnetic Survey
10/24THOR MINING : Appendix 3G Amendment
10/24THOR MINING : Appendix 3G - Issue of Tranche 1 Securities
09/16Metal Tiger plc - Participation in Thor Mining Placing
More news
Sales 2020 - - -
Net income 2020 -0,92 M -1,20 M -1,20 M
Net cash 2020 0,19 M 0,25 M 0,25 M
P/E ratio 2020 -3,28x
Yield 2020 -
Capitalization 18,7 M 24,3 M 24,3 M
EV / Sales 2019 -
EV / Sales 2020 -
Nbr of Employees 7
Free-Float 54,7%
Duration : Period :
Thor Mining PLC Technical Analysis Chart | MarketScreener
Full-screen chart
Technical analysis trends THOR MINING PLC
Short TermMid-TermLong Term
Income Statement Evolution
Michael Robert Billing Executive Chairman & Chief Executive Officer
Ray Ridge Chief Financial Officer & Co-Secretary
Richard Simon Bradey Executive Director & Chief Exploration Geologist
Mark Roderick Potter Non-Executive Director
Mark McGeough Non-Executive Director