Though coolant and antifreeze are often used interchangeably, they aren't the same. Antifreeze is made of ethylene glycol or propylene glycol and is the basic ingredient, but it has to be mixed with water to create coolant, which is the cocktail you will find in the cooling systems of all 'water-cooled' vehicles.

Related:Is Your Check-Engine Light On? 5 of the Most Common Causes

Coolant typically consists of a 50-50 mix of antifreeze and water, though it can contain as much as much as 70% antifreeze for extreme cold temperatures. The 50-50 blend provides sufficient cooling for engines that operate at more than 200 degrees and prevents freezing in temperatures of 30 degrees below zero or lower.

Water alone has neither the cooling ability nor the protection against freezing that engines require because it boils at 212 degrees and freezes at 32, plus it can rust cooling system parts. Overheating can warp engine parts, and liquid expands when it freezes, so that can crack engine blocks and other parts.

Using straight antifreeze won't provide more protection against freezing.The freezing point of antifreeze alone is zero, but a 50-50 mix with water lowers the freezing point to minus 35 and raises the boiling point to 223 or higher.

When the engine is off, coolant resides in the radiator. When the engine is running it gets pumped through passageways in the engine to absorb heat and then goes back through the radiator, where it is cooled by fresh air before circulating through the engine again. When a vehicle's heater is being used, some coolant gets diverted to the heater core; the coolant warms the heater core, and the fan blows air warmed by the core into the interior.

How Is Antifreeze Different?

Antifreeze is different in that it contains corrosion inhibitors to prevent rust that can damage the radiator, water pump and other cooling system parts. Flushing the cooling systems and putting in fresh coolant used to be a regular maintenance item, but many current vehicles can go 100,000 miles before a flush is needed or never require new coolant.

Antifreeze comes in different colors, such as green, orange and pink, among others, and in different chemical formulas that are designed for specific vehicles. Among the different types of chemistry are inorganic acid technology, organic acid technology and a hybrid of the two. They shouldn't be mixed with each other. Information on which antifreeze to use should be in the vehicle's owner's manual.

Safety Implications

Do-it-yourselfers who want to top off or replace their coolant should shop carefully to make sure they are buying the right blend for their vehicle. Consult your owner's manual to determine the type that is needed and read labels closely before buying. Parts stores sell containers of straight antifreeze and ones that are premixed with 50% water, so that's another detail to check.

Adding small amounts of straight antifreeze to top off the cooling system won't upset the cooling and boiling protection, but the best practice is to mix it with the appropriate amount of water. Coolant should be added to the cooling system overflow reservoir when the engine is cold. The reservoir will have markings that show whether the coolant level is low.

Never remove the radiator cap when the engine is hot because the cooling system operates under pressure and the coolant temperature will be more than 200 degrees.

More From Cars.com:

Cars.com's Editorial department is your source for automotive news and reviews. In line with Cars.com's long-standing ethics policy, editors and reviewers don't accept gifts or free trips from automakers. The Editorial department is independent of Cars.com's advertising, sales and sponsored content departments.

Share

Attachments

  • Original document
  • Permalink

Disclaimer

Cars.com Inc. published this content on 30 May 2021 and is solely responsible for the information contained therein. Distributed by Public, unedited and unaltered, on 01 June 2021 15:02:06 UTC.