HIGHLIGHTS:
-
38,000 m drill program in progress;
-
~80% of the drill program is focused on expanding the existing Mineral Resources and on discovering additional resources; the deposit is open along strike and at depth;
-
5,000 m of the drill program dedicated to testing for feeder zones for the large Silver Sand deposit;
-
District exploration drilling to target the
North Block and Snake Hole Zone ; -
Mineral continuity and geotechnical drilling to support the Silver Sand Preliminary Economic Assessment ("PEA"); and
- Environmental baseline, socioeconomic and social responsibility studies underway.
SILVER SAND 2021 DRILL PROGRAM
Two diamond drill rigs are currently active on the Project and two additional drill rigs are scheduled to arrive at the Project over the coming days. It is expected that four drill rigs will be fully operational in
The objectives of the 38,000 m drill program are to expand the existing Silver Sand resource, which remains open along strike and at depth, and to complete geotechnical drilling to support the PEA study. The drill program is comprised of three main components:
- Resource expansion: ~23,500 m planned for expansion of the existing Mineral Resource and to complete initial dill testing for potential feeder zones;
-
Exploration: ~6,500 m planned for exploration at the newly discovered
Snake Hole Zone and the North Block properties; and - Mineral continuity and geotechnical drilling: ~8,000 m planned to support ongoing PEA studies.
In addition to the 2021 drill program, the Company continues to advance and has initiated key studies and initiatives in support of the
Details of the drill program follow in the sections below.
RESOURCE EXPANSION
Drilling to date indicates the Silver Sand hydrothermal system remains open for expansion along strike and at depth. The Company has allocated ~23,500 m of the drill program to potentially grow the existing Mineral Resources by testing gaps in the current model and by drilling exploration targets adjacent to and beneath the current conceptual constrained Mineral Resource under National Instrument 43-101 — Standards of Disclosure for Mineral Projects ("NI 43-101"). The primary focus will be on drilling the area between the Central and South Zones, in the Mirador Area, with the remainder testing the northern strike extent of the deposit (Figure 1).
Feeder Zones
To date, approximately 100,000 m have been drilled at the Project in about 400 diamond drill holes that have tested only the upper ~250 m to 300 m of the large, silver-rich, hydrothermal system. None of the drill holes have encountered mineralized intrusive source rocks and/or thicker, higher grade, structurally controlled fluid conduits, which are postulated to be the source of the silver mineralization.
Analysis of the data suggests an intrusive heat source and associated structural plumbing system for the deposit may occur at depth between the Central and South Zones, in the Mirador Area (Figure 1). Circumstantial evidence for this hypothesis includes: the increased structural complexity of the area; the presence of thicker mineralized veins which were the sites of the majority of historic mining activities; an increase in anomalous base metal content, especially zinc, within the lower portions of drill holes completed in the immediate area; a localized increase in alteration assemblage minerals suggestive of higher heat flow (i.e., muscovite-sericite); and the presence of a post-mineral volcanic diatreme breccia nearby. Of the 23,500 m allocated to resource expansion, ~5,000 m are designed to explore the system at depth, with several 1,000 metre-long drill holes planned (Figure 1).
EXPLORATION
Located approximately 600 m east of the currently defined Silver Sand deposit (Figure 2), the
During the first quarter of 2020, an additional eight follow-up drill holes were completed. Multiple drill holes intersected several zones of structurally controlled silver mineralization with highlighted results of 126 g/t silver over 39.39 m, including 159 g/t silver over 30.93 m and 354 g/t silver over 12.26 m in hole DSS5228. Please refer to the Company's news release dated
The objective of the 2021 drill program is to better understand the size potential of these silver zones and to continue the exploration of the target along the 650 m strike extent to the north. A total of 2,500 m have been allocated for this phase of work.
North Block
At the beginning of the fourth quarter of 2021, the Company plans to commence the inaugural drilling of the North Block properties, which include the El Bronce, Jisas and Jardan areas. Approximately 4,000 m in 18 drill holes are planned for the initial test.
At the district scale, the North Block occurs within the Eastern Intrusive Trend (Figure 2). The geology of the North Block differs considerably from that at Silver Sand as it is comprised of intermediate to felsic intrusive units, which are a more geologically typical sequence for the deposit type being explored for. Notably, the El Bronce property contains numerous historic mine workings that exploited both steeply dipping and flat-lying, high-grade, silver-rich polymetallic veins over an area approximately 500 m wide by 1 km long in strike. Detailed geological mapping indicates the intrusive host rocks are pervasively flooded by moderate to intense alteration, which reflects the passage of silver-rich hydrothermal fluids (phylic alteration (sericite) with local argillic (kaolinite) and propylitic (chlorite-epidote) zones). Surface mapping has also identified good to moderate micro-veining and stockwork development between the principal historically exploited structures thereby forming an attractive bulk tonnage target.
Importantly, the geology, alteration and style of existing silver mineralization at the North Block provides compelling evidence that the Silver Sand deposit forms part of a larger regional to district-scale, silver-rich, hydrothermal system or systems whose exploration potential remains to be unlocked.
MINERAL CONTINUITY AND GEOTECHNICAL DRILLING
To support the current PEA and future advanced engineering and mining studies, the Company will complete approximately 8,000 m of short-interval, orientated, mineral continuity and geotechnical, cross-style drill-sets, in three separate areas in the south and north portions of the
In addition, the geotechnical drill holes are expected to support the planning of mine infrastructure and pit stability studies. The drill core derived from this phase of drilling will also be utilized for future geometallurgical test programs.
Figure 1: Long Section of the Silver Sand resource model, looking west, displaying selected drill holes for the 2021 drill program: yellow drill trace = deep drill holes exploring feeder zones; blue and green drill trace = resource expansion and exploration drill holes. Resource model as presented in the Company's Technical Report entitled "Silver Sand Deposit Mineral Resource Report (Amended)" dated
Figure 2: Surface geology map of the
QUALIFIED PERSON
The scientific and technical information contained in this news release has been reviewed and approved by
ABOUT NEW PACIFIC
New Pacific is a Canadian exploration and development company with precious metal projects, including the flagship
For further information, please contact:
VP, Investor Relations and Corporate Communications
Phone: (604) 633-1368
E-mail: info@newpacificmetals.com
www.newpacificmetals.com
To receive company news by e-mail, please register using New Pacific's website at www.newpacificmetals.com.
CAUTIONARY NOTE REGARDING FORWARD-LOOKING INFORMATION
Certain of the statements and information in this news release constitute "forward-looking statements" within the meaning of the United States Private Securities Litigation Reform Act of 1995 and "forward-looking information" within the meaning of applicable Canadian provincial securities laws. Any statements or information that express or involve discussions with respect to predictions, expectations, beliefs, plans, projections, objectives, assumptions or future events or performance (often, but not always, using words or phrases such as "expects", "is expected", "anticipates", "believes", "plans", "projects", "estimates", "assumes", "intends", "strategies", "targets", "goals", "forecasts", "objectives", "budgets", "schedules", "potential" or variations thereof or stating that certain actions, events or results "may", "could", "would", "might" or "will" be taken, occur or be achieved, or the negative of any of these terms and similar expressions) are not statements of historical fact and may be forward-looking statements or information. Such statements include, but are not limited to: statements regarding anticipated exploration, drilling, development, construction, and other activities or achievements of the Company; timing of receipt of permits and regulatory approvals; and estimates of the Company's revenues and capital expenditures.
Forward-looking statements or information are subject to a variety of known and unknown risks, uncertainties and other factors that could cause actual events or results to differ from those reflected in the forward-looking statements or information, including, without limitation, risks relating to: global economic and social impact of COVID-19; fluctuating equity prices, bond prices, commodity prices; calculation of resources, reserves and mineralization, general economic conditions, foreign exchange risks, interest rate risk, foreign investment risk; loss of key personnel; conflicts of interest; dependence on management, uncertainties relating to the availability and costs of financing needed in the future, environmental risks, operations and political conditions, the regulatory environment in
This list is not exhaustive of the factors that may affect any of the Company's forward-looking statements or information.
The forward-looking statements are necessarily based on a number of estimates, assumptions, beliefs, expectations and opinions of management as of the date of this news release that, while considered reasonable by management, are inherently subject to significant business, economic and competitive uncertainties and contingencies. These estimates, assumptions, beliefs, expectations and options include, but are not limited to, those related to the Company's ability to carry on current and future operations, including: the duration and effects of COVID-19 on our operations and workforce; development and exploration activities; the timing, extent, duration and economic viability of such operations; the accuracy and reliability of estimates, projections, forecasts, studies and assessments; the Company's ability to meet or achieve estimates, projections and forecasts; the stabilization of the political climate in
Although the forward-looking statements contained in this news release are based upon what management believes are reasonable assumptions, there can be no assurance that actual results will be consistent with these forward-looking statements. All forward-looking statements in this news release are qualified by these cautionary statements. Accordingly, readers should not place undue reliance on such statements. Other than specifically required by applicable laws, the Company is under no obligation and expressly disclaims any such obligation to update or alter the forward-looking statements whether as a result of new information, future events or otherwise except as may be required by law. These forward-looking statements are made as of the date of this news release.
CAUTIONARY NOTE TO US INVESTORS
The disclosure in this news release and referred to herein was prepared in accordance with NI 43-101 which differs significantly from the requirements of the
Investors are cautioned not to assume that any part or all of mineral resources will ever be converted into reserves. Pursuant to CIM Definition Standards, "Inferred mineral resources" are that part of a mineral resource for which quantity and grade or quality are estimated on the basis of limited geological evidence and sampling. Such geological evidence is sufficient to imply but not verify geological and grade or quality continuity. An inferred mineral resource has a lower level of confidence than that applying to an indicated mineral resource and must not be converted to a mineral reserve. However, it is reasonably expected that the majority of inferred mineral resources could be upgraded to indicated mineral resources with continued exploration. Under Canadian rules, estimates of inferred mineral resources may not form the basis of feasibility or pre-feasibility studies, except in rare cases. Investors are cautioned not to assume that all or any part of an inferred mineral resource is economically or legally mineable. Disclosure of "contained ounces" in a resource is permitted disclosure under Canadian regulations; however, the
Canadian standards, including the CIM Definition Standards and NI 43-101, differ significantly from standards in the SEC Industry Guide 7. Effective
View original content to download multimedia:https://www.prnewswire.com/news-releases/new-pacific-commences-a-38-000-metre-exploration-and-resource-expansion-drill-program-at-its-flagship-silver-sand-project-301342588.html
SOURCE
© Canada Newswire, source