Silver Bullet Mines Corp. (SBMI) announced that it is again processing mineralized material at its 125 TPD pilot plant. The mill is currently being fine tuned with low grade material to set the recovery parameters.

Having resolved the issues with pouring silver dore bars, and having made the necessary related modification to the mill circuit, the Company intends to soon process higher grade material. To date the mill has been operating to specifications with non-detectable values for silver in the tailings produced from the shaker table. The Company has one outstanding order for 50 kilograms of silver including credits for any contained copper or gold.

The purchaser of those 50 kilograms has indicated a willingness to acquire up to 500 kilograms of silver on one week's written notice. The Company is also in discussions with other potential purchasers. Like any responsible producer, SBMI operates its own assay lab.

SBMI continues to implement a strategic sampling program using that lab to enable it to maintain silver grade control to the mill. Below is a list of recent highlight assays and photos from the vein in the upper adit at the Buckeye Mine, from an area to which the Company recently drifted behind the Treasure Room (not all assay results are reported). Note that all of the samples listed and photographed below are from the upper adit 420ft - 444ft from the entrance of the upper adit.

High grade vein material: 270.0 ounces per ton silver; 290.0 ounces per ton silver; 297.6 ounces per ton silver; and 284.0 ounces per ton silver. Green Vein Material: 60.0 ounces per ton silver; 78.8 ounces per ton silver; 47.2 ounces per ton silver; and 40.5 ounces per ton silver. Silver Coloured Vein material: 79.4 ounces per ton silver; 89.0 ounces per ton silver; 96.8 ounces per ton silver; and 43.0 ounces per ton silver.

10ft Channel Samples Across Vein: 18.0 ounces per ton silver average across 10ft @ 432ft from the adit portal; and 49.6 ounces per ton silver average across 10ft @ 444ft from the adit portal. Drill Cuttings From Blast Holes: 2.8 ounces per ton silver average over 12ft @ 420-432ft from the adit portal; and 5.8 ounces per ton silver average over 12ft @ 432-444ft from the adit portal. The Company currently has approximately 750 tons of run of mine mineralized material at the minesite ready for transportation to and processing at the mill site in Globe.

QAQC: All the samples above were collected by SBMI's field team. Samples were collected and placed in sample bags with their appropriate tag and processed at the Company's own assay lab. Like any responsible producer, the Company owns its own assay lab and regularly takes samples as part of its production process.

The samples analyzed by SBMI at its facility near Globe, Arizona were processed through the Lab Jaw Crusher, Lab Hammer Mill and Splitter Box into an aliquot. Most of the pulverized aliquot was mixed with a flux and flour combination and melted in a crucible at 1,850 degree Fahrenheit, with the remainder being logged and archived. Upon cooling, the poured melt was in the form of a metal button and slag, following which a bone ash cupel was utilized to eliminate the lead in the button to form a bead.

The bead was then weighed, following which a solution of 6 to 1 distilled water to nitric acid was utilized to dissolve the silver in the bead at approximately 175 degrees Fahrenheit.