VDM Group Limited received the chemical assay results from ALS for The CdB Project is located east of the regional capital and coastal city of Sumbe (airport and port) and approximately 385 km south of the Angolan capital city of Luanda. The CdB Project covers 3,854kms2 and is approximately 32kms from East to West and 129kms from North to South. The CdB Project shows characteristics of a typical central African sediment-hosted copper deposit. VDM's Phase 2 drilling program commenced on 6 May 2019 and was completed in late November 2019 with a total of ninety-three (93) holes having been drilled for 5,690.70 metres. Forty-nine (49) holes were drilled in Area 3 building on earlier positive results from Phase One; whilst thirty-three (33) holes were drilled in Area 4 and eleven (11) holes in Area 5 and were aimed at investigating targets generated from geological mapping, geochemical and geophysical information. Phase 2 drill-holes were largely to a depth of about 60 metres and are targeting near to surface mineralisation. Of the 93 holes drilled, four holes of between 120m and 150m were drilled for structural and hydrological purposes. In contrast, the Phase One Drilling Program comprised a total of 41 diamond core holes for a cumulative total of 3,903 metres. Twenty (20) holes were drilled in Areas 1, 2 and 3 to verify historical information; whilst twelve (12) holes were drilled in Area 4 and nine (9) holes in Area 5 and were aimed at investigating targets generated from geological mapping, geochemical and geophysical information. A map of the location of the drill-holes from all historical phases of drilling overlaid on the tenement blocks A total of 779 samples were collected from the half cores of the mineralised intervals and boundaries. The samples were crushed before being sent to ALS in Guangzhou, China for analysis. Assays results returned reflect that fifty-six (56) of the ninety-three (93) holes contained mineralisation grading better than 0.5% Cu. And that the mineralisation generally was intersected in a 40m zone that extends from 40m below surface to 80m below surface. All assays grading better than 0.5% Better assays include: 8.64m @ 2.60% Cu from 53.961m, including 1.1m @ 4.98% Cu from 61.47m in Hole 10 (located in Area 3); 3.15m @ 3.60% Cu from 35.20, including 1.08m @ 5.5% Cu from 37.27m in Hole 25 (located in Area 3); and 4m @t 2.13% Cu from 34m in Hole 16 (located in Area 3). Planning for the third phase of drilling at CdB is underway and will incorporate these recent results. On-the-ground activity is however currently suspended due to COVID-19 pandemic.