Kintavar Exploration Inc. announced the results from the summer drilling at the MLI corridor and the exploration plans for the upcoming months at the Mitchi-Wabash district including follow up drilling at the Lara zone (Wabash project) targeting the high grade horizon and infill drilling at the Sherlock zone (Mitchi project), to bring it towards a maiden resource estimate. Wabash - MLI Corridor: All the 6 holes along the 100m strike length within the Lara zone have successfully intersected the polymetallic mineralization with copper, silver, lead and zinc. From two (2) to four (4) mineralized marble and diopside gneiss horizons have been intersected in each hole with width ranging from 3m to 25m. Best intercepts include 5.35m @ 1.19% Cu and 28.4 g/t Ag within a wider intersection of 19m @ 0.59% Cu and 19.1 g/t Ag in hole WAB-22-22.

A detailed table of the main mineralized intercepts can be seen below including the associated Pb and Zn grades. The drilling program targeted and successfully intersected the mineralization from surface and up to a depth of 75m. Although the mineralization was intersected in all the holes, a strong variation in thickness and grade has been observed associated with structural controls.

As a result, additional drilling to target the extensions of the high-grade zone are being planned for November and December. Two drill holes were added into the Indiana zone which successfully demonstrated the extension of the MLI corridor for over 1km with the best intercept of 0.36% Cu and 39.6 g/t Ag over 8.45m in hole WAB-22-31. As can be observed in the detailed magnetics map, and already confirmed by trenching along the MLI corridor, the mineralization extends along the structure with local pinching and swelling (boudinage) structures and some faults.

Additional drilling will be required to locate and connect the best mineralized horizons. Mitchi - Sherlock zone: Following the review of all the mineralized zones identified to date (Mitchi: Sherlock/Watson, Elementary/Conan, Nasigon, Huard and Roccia, and Wabash: MLI, Wabash North (Cloutier), Richer and Cooper), the Corporation intends to gradually add infill drilling into various zones in order to bring them towards a resource estimate. In parallel to the drilling planned at Lara, an infill drilling program is being planned for the Sherlock zone.

The Sherlock zone has already been demonstrated to extend for over 500m E-W and up to 300m N-S. The drilling will focus on areas with mineralization starting from surface and where thickness and grade are the most significant in the top 100m. The drilling program is expected to be completed by end of December. Permits are already in place for both Lara and Sherlock drilling programs. All samples have been sent and prepared (PREP-31) by ALS Global laboratory in Val-d'Or.

Gold is analysed in Val d'Or using fire assay method (AU-AA25) with gravimetric finish (Au-GRA21) for samples higher than 0.5 ppm Au. For base metals and silver, the pulp was sent to ALS Global laboratory in Vancouver for multi-elemental analysis by four acid digestion (ME-ICP61) with ICP- AES finish. Samples with assays higher than 10,000 ppm Cu, Zn or Pb, or 100 ppm Ag were reanalyzed with over limits methods (CU-OG62, ZN-OG62, PB-OG62, or AG-OG62) at the ALS Global Vancouver laboratory.

Quality controls include systematic addition of blank samples and certified copper standards to each batch of samples sent to the laboratory.